by Gadget » Wed Jan 25, 2006 1:42 pm
I remember when I had what sounds like a similar noise, it was also as a result of having the shocks out. To remove the shocks in a JZA80 you must also disconnect the top A-arm from the suspension pickup point. There are two points that can create this noise after having the shocks out, one is the long pivot bolt on the inner end of the A-arm, and the other is the pinch-bolt at the bottom of the shock. If either of these aren't solidly tight, they will move slightly, and could quite possibly create the 'pop' that you describe.
Last edited by
Gadget on Wed Jan 25, 2006 1:52 pm, edited 1 time in total.