Toyspeed.org.nz Message Board

by **SINISTER_KP60** » Mon Feb 06, 2006 9:03 am

hey im new to the world of toyota, was a nissan drift nut till sum prick stole my turbo cef, then brought a kp60 starlet the same day pretty mint looks good, but its got a pain in the arse 2k 1000cc sewing machine

getting a 4k wit twin carbs, just woundering wot mods can b done to a 4k to make it go hard and pull good skids any help wood b great

thanks guys,

by **Chickenman** » Mon Feb 06, 2006 9:08 am

Use the search button up underneath the banner.

Pop a skid aye... I popped a ventricle once.

by **Lloyd** » Mon Feb 06, 2006 9:46 am

Do this to it: http://i23.photobucket.com/albums/b387/ ... Engine.jpg

Shouldn't need much, bit of a port and a cam to start with.

by **vhpacer** » Mon Feb 06, 2006 11:36 am

Cam, shave the head, extractors, exhaust, 32/36 webber carb or sidedraughts depending on your $$$ situation

Then you should be able to pop a fairly nice skid

OMG so shiny! · by **Dell'Orto** » Mon Feb 06, 2006 3:26 pm

3 C's seem to work well with 4K's...Cam, Carbs, Compresson.
Clean up the ports if you want, going bigger on stock valves is a waste of time. A light flywheel will help with doing skids, but you'll also find that K40/50's wont like being abused for too long

by **Loudtoy** » Tue Feb 07, 2006 10:15 pm

Mmm, Boost wrote:3 C's seem to work well with 4K's...Cam, Carbs, Compresson.
Clean up the ports if you want, going bigger on stock valves is a waste of time. A light flywheel will help with doing skids, but you'll also find that K40/50's wont like being abused for too long

Actually i'm in the process of doing these three c's myself, if you can wait for me to get my arse into gear i can tell you how it goes, have the cam and carbs and 3 k head sitting there waiting to go on the car just need to take them out of the boot and put them in the ront where they belong

by **drftnmaz** » Wed Feb 08, 2006 1:03 pm

they go well and do good skidz with a turbo hanging off the side... really strong motors as well.

by **tomo1985** » Wed Feb 08, 2006 3:13 pm

are they blow through carbs on that turbo 4k

by **Lloyd** » Wed Feb 08, 2006 7:36 pm

Yup, plain old twin carbs

by **Loudtoy** » Wed Feb 08, 2006 7:39 pm

HRT wrote:Yup, plain old twin carbs

Re Jetted or very low boost then??

by **Lloyd** » Wed Feb 08, 2006 7:44 pm

Think they're off a 2T actually, only running 4psi. Not my car, workmates

by **drftnmaz** » Thu Feb 09, 2006 10:00 pm

you can run abit of boost on carbs... cause u have rising rate fuel reg pound for pound so fuel increase is automatic

mine hits 12psi most days :twisted:

Toyspeed.org.nz Message Board

4k mods?

4k mods?

Who is online