Toyspeed.org.nz Message Board

by **evil_si** » Wed Feb 08, 2006 6:53 pm

ok i need a mag repaired,

who have you used in auckland?
and what were they like

i have a nice crack and a buckle. :roll:

damn shitty roads,

manukau auto and tyre,
mag and homo, im not really a fan and they outwork everything anyway

by **Jebus** » Wed Feb 08, 2006 7:43 pm

Arrow wheels, havnt had work done, but have talked to them a bit before and they sound brilliant.

by **86_rolla** » Wed Feb 08, 2006 8:10 pm

got my mags done and manukau auto and tyre got done and cost $200.

Wheres the crack?? if its in the acutual spoke they wont repair it i think

by **Malcolm** » Wed Feb 08, 2006 8:37 pm

I had a buckled + cracked wheel repaired by arrow for about $150 a few years ago. Good service etc

by **evil_si** » Wed Feb 08, 2006 10:45 pm

just a crack and buckle on edge of rim, damn cheap arse 18's

by **rage** » Thu Feb 09, 2006 1:39 am

All_Fours wrote:I had a buckled + cracked wheel repaired by arrow for about $150 a few years ago. Good service etc

me too. took 2 days or something.

by **THA SHZ** » Thu Feb 09, 2006 6:58 am

evil_si wrote:ok i need a mag repaired,

who have you used in auckland?
and what were they like

i have a nice crack and a buckle.
damn shitty roads,

manukau auto and tyre,
mag and homo, im not really a fan and they outwork everything anyway

how bout ringing me and il send it to my mag wheel repairer , or did u forget where ur mate wrks :lol:

by **evil_si** » Thu Feb 09, 2006 7:19 pm

THA SHZ wrote:
how bout ringing me and il send it to my mag wheel repairer , or did u forget where ur mate wrks

huh mate? i didint think i had any :lol:

by **THA SHZ** » Thu Feb 09, 2006 8:10 pm

evil_si wrote:huh mate? i didint think i had any

well u dont i was just bein nice but screw u hippie , go hug sum trees :lol:

by **rxtoy** » Mon Feb 13, 2006 1:28 pm

if you want to come over the shore simon there's a place on barry's point rd who do it, brugar engineering. i've had some other work done by them before (spacer for the water pump on the v6 and some welding on my drop tank) which was pretty average but they've got a really good reputation for wheels.

hows the 7 going???

cheers
Matt

by **levin_it_large** » Mon Feb 13, 2006 4:50 pm

brugar engineering

they send their stuff to Arrow wheels! :lol:

by **evil_si** » Mon Feb 13, 2006 5:04 pm

ended up taking it to machine part welding, apparently they do a shitload of wheel repairs for various companies,

hopefully will know this week.

matt, as for the 7 it now runs, is loud and pulses quite hard, a few things to sort and off for tuning. :lol:

by **THA SHZ** » Mon Feb 13, 2006 6:36 pm

rxtoy wrote:if you want to come over the shore simon there's a place on barry's point rd who do it, brugar engineering. i've had some other work done by them before (spacer for the water pump on the v6 and some welding on my drop tank) which was pretty average but they've got a really good reputation for wheels.

hows the 7 going???

cheers
Matt

do not go to brugar , they donot know wot they r doin , ask side fx

by **rxtoy** » Mon Feb 13, 2006 9:21 pm

don't know about knowing what they're doing but brugar definitly don't outsource. they actually sent me to Arrow for a bent lip on a 3 piece wheel but arrow couldn't fix it either.

might have to drop around for a look at the 7 sometime this week, would be keen as to see it running. don't suppose you've got any days off???? i'm on leave for the next 2 weeks for my sister's wedding so anytime suits me, or i'll come after work one night.

cheers
Matt

by **evil_si** » Mon Feb 13, 2006 9:46 pm

time off me never! haha.
graeham has cut some of the wiring apart again to sort sum shit out.

but gimme a buzz when your free, im hoping to get it out to have alignment and tuning done later this week.

Toyspeed.org.nz Message Board

wheel repairs in auckland, who does it

wheel repairs in auckland, who does it

Re: wheel repairs in auckland, who does it

Re: wheel repairs in auckland, who does it

Re: wheel repairs in auckland, who does it

Who is online