Place to get custom radiator hose in Auckland

[HELBND]

Ok does anyone know where i can get a custom shaped radiator hose in auckland? I need this ASAP please help!

[Jebus]

Would a flexi hose suffice? just a rad hose thats ribbed and can be manipulated to any shape, all retailers sell them.

[Silent Knight]

Go to ENZED and get a custom braided hose made up....

[Jebus]

You should probaly rob a bank on the way.

[HELBND]

Go to ENZED and get a custom braided hose made up....

You should probaly rob a bank on the way

Yea thats slightly too hardcore. I just need your average radiator piping - in a not so average shape

[Jebus]

Yep a flexi hose is what you want, go see repco etc.

Same price roughly as a normal one.

[HELBND]

Cheers will try that

[Silent Knight]

I wouldn't think it's that expensive. I've had braided lines made for me before but that was at a place out in Otahuh/Ellerslie. (Can't remember which one)

I suspect you'd be looking at around 200$ for a Radiator one depending on the lenght.

Hey look at it this way...you'll have some bling shiny bits to impress the be-aches with!!!

[HELBND]

i already got bling shiny bits, and you wont be able to see most of this hose anyway

[MrOizo]

just go to super cheap and have a look at what they have there.

and then get some pipe with the same ID as the hoses OD and some hose clips.

how long you needing it?

[HELBND]

probably bout a metre and a half, with 3 90 degree bends in it

[slonlo]

get a steel one made up at an mufflershop and use two short hoses to join it up