ST202 and tanabe springs advice please

General discussions on all non technical car related topics

Moderator: The Mod Squad

ST202 and tanabe springs advice please

Postby Cubix » Sun Mar 05, 2006 2:27 pm

Hi, anyone tried to put on a set of Tanabe DF210 springs on to a 98' SSIII celica? How was it? What was the ride like? How low did it go? Do you still have the 10cm legal clearance from the road? How much did it cost?

Any suggestions to what other springs I should get instead? Again, what was the ride like? How much lower was it? People have suggested TRD, but I'd like to know answers to the above questions.

I've tried a search but I wasn't able to find answers I was looking for, so if anyone has any info it would be greatly appreciated.
Cubix
Toyspeed Member
 
Posts: 2
Joined: Sun Mar 05, 2006 2:19 pm

Postby soven » Sun Mar 05, 2006 2:41 pm

the tanabe would lower the car 50-60mm.

For everyday driving, I suggest Teins. lowers 1.5inches in front and 1 inch in the rear and will balance out the car.

./edit actually, since you have superstrut... not sure if tein would be an option.
User avatar
soven
Toyspeed Member
 
Posts: 284
Joined: Mon Mar 14, 2005 7:26 pm
Location: Auckland

Postby Andy » Mon Mar 06, 2006 1:00 pm

http://www.tein.co.jp/ti/toyota.html

See if the Tein S Tech is avaliable for your car. I am using it myself (on an AE111), very comfortable ride and hard enough for street driving.

from Andy
Andy
Toyspeed Member
 
Posts: 425
Joined: Sun May 19, 2002 9:00 am
Location: Auckland

Postby Rexism » Mon Mar 06, 2006 2:10 pm

hi there, my brother also have the same car (celica SSIII 98 )
would like to ask where could u get those Tein springs from in auckland and also what are the price for them fitted?? also what would the TRD springs cost and how much would they lower the car?
tks
Rexism
Toyspeed Member
 
Posts: 3
Joined: Thu Aug 11, 2005 4:50 pm

Postby Andy » Mon Mar 06, 2006 4:25 pm

Note I am not the person who is selling these, just found it on trademe.

http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Performance/Suspension-braces/auction-49392296.htm

I bought mine through FBI performance in Auckland a year ago, for abit more than what the guy is asking for on trademe. The Tein springs are progressive rate, the harder they are compressed, the harder the spring is, hence slightly more comfortable than fixed rate ones.

Don't know anything about the TRD springs.

from Andy
Andy
Toyspeed Member
 
Posts: 425
Joined: Sun May 19, 2002 9:00 am
Location: Auckland

Postby Fortyone.co.nz » Mon Mar 06, 2006 9:17 pm

The Tanabe springs lower the car as follows:

NF210 Springs: 25-35mm F, 20-30mm R, 2.9KG / 2.3KG
GF210 Springs: 25-35mm F, 20-30mm R, 3.5KG / 3.0KG
DF210 Springs: 40-50mm F, 30-40mm R, 3.1KG / 2.8KG

Any questions just ask - authorized dealer here!
Fortyone.co.nz - For Bride, EBC, KTS, JUN, Tomei, HKS, Trust, Blitz and more!
User avatar
Fortyone.co.nz
Toyspeed Sponsor
 
Posts: 1494
Joined: Wed Aug 24, 2005 5:51 pm
Location: At 41.co.nz


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 34 guests