Whats the impedence of gze+bluetop injectors?

[crnkin]

I did a search, but seems to just stall for 5 mins then loose the connection

I cant remember, so please help!

Looking to experiment with 4agte setup

cheers!

[Lloyd]

GZE are low impedance. Around the 2 ohm mark from memory


EDIT - Seems all 4AGE injectors are low impedance?
http://my.tele2.ee/levintrueno/engine/engine.htm

[crnkin]

hmmm, according to that list your right, i was sure there was a high impedance injector that i was to avoid, can anyone shed light on the subject?

[Donor]

So what impedance injectors would you run with a link? is the impedance the resistance between the inj terminals?

[crnkin]

yes its the total individual resistance of the injector solenoid. Link can use anything as far as im aware

[Lloyd]

Older Links were supposed to be high resistance, not sure on the new ones. Hence the need for resistor packs for the injectors.

And yes it is resistance between the terminals. Low impedance are usually around the 2-3 ohm mark and high impedance up around the 12-14 ohm.

[Caveman]

Small port injectors are 13.7 ohm. High impedence

Big port are low impedence

Supercharger are low impedence. Around 3 ohm IIRC

[crnkin]

thanks 1998! im gonna buy a few different types and see what the highest cc'd injectors i can run for good drivability but good boost.

cher