Toyspeed.org.nz Message Board

by **4000GT** » Mon May 01, 2006 7:18 pm

Pretty sure its not the sending... so the next most common fixes are...???

by **opticalblue** » Mon May 01, 2006 8:02 pm

have you check the plugs to see if the wires may have come loose... do the wiggle test...

by **4000GT** » Mon May 01, 2006 9:38 pm

opticalblue wrote:have you check the plugs to see if the wires may have come loose... do the wiggle test...

Plugs on the cluster?

by **matt dunn** » Mon May 01, 2006 11:48 pm

CircuitLevin wrote:Pretty sure its not the sending...

because...........

by **opticalblue** » Tue May 02, 2006 5:44 am

just the plugs on the speedo circurt...

by **4000GT** » Tue May 02, 2006 8:44 am

matt dunn wrote:
CircuitLevin wrote:Pretty sure its not the sending...

because...........

We replaced it with another.

by **matt dunn** » Tue May 02, 2006 11:04 pm

CircuitLevin wrote:Pretty sure its not the sending because we replaced it with another.

Usually a good way to tell.

Have you hooked up anything that may be killing the signal such as speed meter, speed cut defender, etc etc?

otherwise you may be looking at a dash problem.

by **4000GT** » Wed May 03, 2006 8:39 am

matt dunn wrote:
CircuitLevin wrote:Pretty sure its not the sending because we replaced it with another.

Usually a good way to tell.

Have you hooked up anything that may be killing the signal such as speed meter, speed cut defender, etc etc?

otherwise you may be looking at a dash problem.

Nothing else is hooked up... I guess the cluster needs to come out. I was hoping there was a relay or fuse that may be causing it.

Toyspeed.org.nz Message Board

Speedo isnt working

Speedo isnt working

Re: Speedo isnt working

Re: Speedo isnt working

Re: Speedo isnt working

Re: Speedo isnt working

Who is online