Engine is 4age
If I wanted to remove the aircon pump do I need to get a pully to replace it or is it possible to just use a shorter belt
What have you guys done
Cheers
Aircon pump removal
Moderator: The Mod Squad
10 posts
• Page 1 of 1
Aircon pump removal
by Caveman » Sun May 07, 2006 3:43 pm
-
Caveman - Toyspeed Member
- Posts: 1918
- Joined: Sun Sep 12, 2004 11:20 am
- Location: West Auckland
by deaf_rattle » Sun May 07, 2006 5:19 pm
hey
yeah i just measured up how long the belt needed to be, and then got the belt to suit
it was just right, i couldnt put it on properly, but got it on most of the way and then cranked the engine a couple of times and sure enough, it went on mint.
but i have found out since then, that you can use the existing tensioner by turning the bolt upside down.
cheers
yeah i just measured up how long the belt needed to be, and then got the belt to suit
it was just right, i couldnt put it on properly, but got it on most of the way and then cranked the engine a couple of times and sure enough, it went on mint.
but i have found out since then, that you can use the existing tensioner by turning the bolt upside down.
cheers
See the animal in his cage that you built. Are you sure what side you're on?
You are all c**ts, ill kill you all
supported by
Click for boobies
You are all c**ts, ill kill you all
supported by
Click for boobies
-
deaf_rattle - Old Skool User!
- Posts: 8039
- Joined: Fri May 17, 2002 1:32 pm
- Location: right where he belongs
by Caveman » Sun May 07, 2006 6:47 pm
Ok thanks guys
In reply to ATAI im doing it on an ae92 4age. I want to keep the PS pump but remove the AC pump. Maybe you have a different model 4age?
Cheers deaf_rattle I will measure the length require. I think a can rangi up a tensioner like you said
In reply to ATAI im doing it on an ae92 4age. I want to keep the PS pump but remove the AC pump. Maybe you have a different model 4age?
Cheers deaf_rattle I will measure the length require. I think a can rangi up a tensioner like you said
-
Caveman - Toyspeed Member
- Posts: 1918
- Joined: Sun Sep 12, 2004 11:20 am
- Location: West Auckland
by deaf_rattle » Sun May 07, 2006 6:50 pm
ill have a look and see if i can find the part number for you.
See the animal in his cage that you built. Are you sure what side you're on?
You are all c**ts, ill kill you all
supported by
Click for boobies
You are all c**ts, ill kill you all
supported by
Click for boobies
-
deaf_rattle - Old Skool User!
- Posts: 8039
- Joined: Fri May 17, 2002 1:32 pm
- Location: right where he belongs
by soopachargen » Sun May 07, 2006 7:56 pm
Further to this... has anyone removed the aircon compressor off a 4agze and kept power steering??
When in doubt, down and out.
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
-
soopachargen - Toyspeed Member
- Posts: 1598
- Joined: Thu Aug 05, 2004 1:54 pm
- Location: Silverdale
by soopachargen » Tue May 09, 2006 5:13 pm
soopachargen wrote:Further to this... has anyone removed the aircon compressor off a 4agze and kept power steering??
anyone??
When in doubt, down and out.
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
-
soopachargen - Toyspeed Member
- Posts: 1598
- Joined: Thu Aug 05, 2004 1:54 pm
- Location: Silverdale
by slighty_sykotic » Tue May 09, 2006 9:32 pm
Yup 
Moved the p/s pump to where the air con used to be (at the bottom, had to do that to clean the turbo), then I made basically a wedge/brace to hold the pump in the right place to put tenison on the belt.
To tighten it, i loosen the bolt, lever the pump down then tighen it. Works ok, soon see what the cert man says though
--Sykotic
Moved the p/s pump to where the air con used to be (at the bottom, had to do that to clean the turbo), then I made basically a wedge/brace to hold the pump in the right place to put tenison on the belt.
To tighten it, i loosen the bolt, lever the pump down then tighen it. Works ok, soon see what the cert man says though
--Sykotic
Proud member of the "No Irrelevant keywords in TM" campaign
-
slighty_sykotic - Toyspeed Member
- Posts: 1749
- Joined: Sat Dec 04, 2004 8:38 pm
- Location: Palmerston North
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests