Looneys new turbo :)

Moderator: The Mod Squad

Postby slighty_looney » Mon Jun 05, 2006 11:07 pm

i didnt say i was going to beat a 13.4 on a td04 or in my car at all, and i never postd that i was going to beat dscrt, pay if u read the actual post b4 nutting off over nothing. and i said "just sumthnk with a bit more power then the hondas round town" not that im going to have more power then ur car, or the fact that im beating all the hondas round town... 8O geeess over reacting hard,

Im happy with how im building my car, and yep i got forged pistons and internals so later on down the line i can go fork out for new turbo ect ect. and the coment about having abit more power then the hondas round town did not mean that im going to have more power then every honda in palmerston north, it was said lightly, it should have been taken lightly aswell :roll:
Last edited by slighty_looney on Mon Jun 05, 2006 11:27 pm, edited 1 time in total.
FC3S
Robinson Steel Fabrications

Current Ride: 88 rx7
Project: viewtopic.php?t=88412
Discussion: viewtopic.php?t=88413
User avatar
slighty_looney
Toyspeed Member
 
Posts: 723
Joined: Mon Feb 27, 2006 8:47 pm
Location: Palmerston North

Postby bluemaumau » Mon Jun 05, 2006 11:12 pm

yea you didnt say that.

what psi are you going to run???????????
Last edited by bluemaumau on Mon Jun 05, 2006 11:17 pm, edited 1 time in total.
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby slighty_looney » Mon Jun 05, 2006 11:15 pm

its getting tunned at 7psi (lowest it will go) to break in the engine then it depends on when my injecters and fuel pump max out after that, i was hoping for 12-14psi
Last edited by slighty_looney on Mon Jun 05, 2006 11:18 pm, edited 1 time in total.
FC3S
Robinson Steel Fabrications

Current Ride: 88 rx7
Project: viewtopic.php?t=88412
Discussion: viewtopic.php?t=88413
User avatar
slighty_looney
Toyspeed Member
 
Posts: 723
Joined: Mon Feb 27, 2006 8:47 pm
Location: Palmerston North

Postby bluemaumau » Mon Jun 05, 2006 11:18 pm

bluemaumau wrote:yea you didnt say that.

what psi are you going to run???????????


you didnt dude look at what i said above i even bolded it up if ur eyesight aint good :P
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby slighty_looney » Mon Jun 05, 2006 11:19 pm

haha yea im blind sorri :P i edited my post above ^^^
FC3S
Robinson Steel Fabrications

Current Ride: 88 rx7
Project: viewtopic.php?t=88412
Discussion: viewtopic.php?t=88413
User avatar
slighty_looney
Toyspeed Member
 
Posts: 723
Joined: Mon Feb 27, 2006 8:47 pm
Location: Palmerston North

Postby bluemaumau » Mon Jun 05, 2006 11:20 pm

oh out of interest why didnt you just get gze pistons? theyd handle it easy
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby slighty_looney » Mon Jun 05, 2006 11:22 pm

i got the forged ones at a really gud price, i thnk it only was like 150$ more then the gze ones, and the forged ones r shiney 8)
FC3S
Robinson Steel Fabrications

Current Ride: 88 rx7
Project: viewtopic.php?t=88412
Discussion: viewtopic.php?t=88413
User avatar
slighty_looney
Toyspeed Member
 
Posts: 723
Joined: Mon Feb 27, 2006 8:47 pm
Location: Palmerston North

Postby bluemaumau » Mon Jun 05, 2006 11:23 pm

sounds algood then.

what brand are they???
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby slighty_looney » Mon Jun 05, 2006 11:25 pm

ACL race series.
Image
FC3S
Robinson Steel Fabrications

Current Ride: 88 rx7
Project: viewtopic.php?t=88412
Discussion: viewtopic.php?t=88413
User avatar
slighty_looney
Toyspeed Member
 
Posts: 723
Joined: Mon Feb 27, 2006 8:47 pm
Location: Palmerston North

Postby Lith » Tue Jun 06, 2006 10:59 am

slighty_looney wrote:i didnt say i was going to beat a 13.4 on a td04 or in my car at all, and i never postd that i was going to beat dscrt, pay if u read the actual post b4 nutting off over nothing. and i said "just sumthnk with a bit more power then the hondas round town" not that im going to have more power then ur car, or the fact that im beating all the hondas round town... 8O geeess over reacting hard,


Sorry, got my wires crossed...

Anyway, TD04 should be an awesome street turbo on it - I suspect it will be underestimated by some as the TD04s do have a reputation for being very small, but definately for your needs it will do the trick.
User avatar
Lith
Toyspeed Member
 
Posts: 3137
Joined: Mon Dec 02, 2002 5:22 pm
Location: Kapiti

Postby slighty_looney » Tue Jun 06, 2006 6:03 pm

Lith wrote:Sorry, got my wires crossed...

Anyway, TD04 should be an awesome street turbo on it - I suspect it will be underestimated by some as the TD04s do have a reputation for being very small, but definately for your needs it will do the trick.


All gud man, thanks aye, i dont see why DSCRET came and nutted at me over nothing, i did not post anywere in this thred about the stuff he said ..... why worry bout what im doing anyway, its my car and im doing it up for me, not to beat or be better then anyone else... (not saying i have dont have a few goals for it) its getting done for what i want out of my 4age
FC3S
Robinson Steel Fabrications

Current Ride: 88 rx7
Project: viewtopic.php?t=88412
Discussion: viewtopic.php?t=88413
User avatar
slighty_looney
Toyspeed Member
 
Posts: 723
Joined: Mon Feb 27, 2006 8:47 pm
Location: Palmerston North

Postby slighty_sykotic » Tue Jun 06, 2006 8:19 pm

And further more....

Of you complaining how bad the td04 is, how many of you have driven properly (for a decent amount of time) a td04 powered 4agte ae101.

And DSCRET, man..... I used to think you were a pretty nice guy (from what I have heard of you), but $&#$%... you sure $&#$% that image up... He wasn't saying anything about your car, and you had to come on a go nuts?

--Sykotic
Proud member of the "No Irrelevant keywords in TM" campaign
User avatar
slighty_sykotic
Toyspeed Member
 
Posts: 1749
Joined: Sat Dec 04, 2004 8:38 pm
Location: Palmerston North

Postby ex mitzy » Tue Jun 06, 2006 10:29 pm

Well mate you dont know me and have never met me. And I didnt nut out if I had nutted off you would know bout it.
yea thats wat i reakn, 4agte all the way and yea its not going to b a hard out drag car, just sumthnk with a bit more power then the hondas round town i work with dscrets father, so i hear alot about hondas from him (he always tells me to buy one) and hes only running a 13.4 1/4 mile on his new engine so thats not a overly fast time, im sure 0 grips 4agte ran a faster time then that? not saying that mynes going to b anywere close to that but im sure she'll go fine for the money iv spent on it
_________________

I was refering to the comments made bout my car "only" running 13.4 and not thinking bout what trap speed my car had which is a true indication of how fast a car really is.
DSCRET teg 210kw@wheels
13.9@108mph
User avatar
ex mitzy
Toyspeed Member
 
Posts: 24
Joined: Thu Jan 30, 2003 10:24 pm

Postby slighty_sykotic » Tue Jun 06, 2006 11:02 pm

Accutly, i have met you.

If you want to play that game, go tell the top fuel cars that you car is doing a 13.4...... I think their 7 seconds kinda beats you?

Thats about as pointless as what your saying.

And sorry if I thought you were nutting off, can you explain to me how I would know if you were nutting off? Just so I know for next time? Should I look out for a certain sign?

--Sykotic


ex mitzy wrote:Well mate you dont know me and have never met me. And I didnt nut out if I had nutted off you would know bout it.
yea thats wat i reakn, 4agte all the way and yea its not going to b a hard out drag car, just sumthnk with a bit more power then the hondas round town i work with dscrets father, so i hear alot about hondas from him (he always tells me to buy one) and hes only running a 13.4 1/4 mile on his new engine so thats not a overly fast time, im sure 0 grips 4agte ran a faster time then that? not saying that mynes going to b anywere close to that but im sure she'll go fine for the money iv spent on it
_________________

I was refering to the comments made bout my car "only" running 13.4 and not thinking bout what trap speed my car had which is a true indication of how fast a car really is.
Proud member of the "No Irrelevant keywords in TM" campaign
User avatar
slighty_sykotic
Toyspeed Member
 
Posts: 1749
Joined: Sat Dec 04, 2004 8:38 pm
Location: Palmerston North

Postby bluemaumau » Wed Jun 07, 2006 12:06 am

dude $&#$% your trap time, you can run a mint trap time and shoot a rod. its the time over 1/4 mile. otherwise wed all be going to meremere to see traps.

idiot
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby ex mitzy » Wed Jun 07, 2006 1:35 pm

I never said it was a real quick time I was just saying i didnt think that he had the right to say that my time wasnt that impressive when he has never ever race down the quater mile. And I never built my car to be a drag car. :wink:
DSCRET teg 210kw@wheels
13.9@108mph
User avatar
ex mitzy
Toyspeed Member
 
Posts: 24
Joined: Thu Jan 30, 2003 10:24 pm

Postby Dell'Orto » Wed Jun 07, 2006 1:51 pm

bluemaumau wrote:dude $&#$% your trap time, you can run a mint trap time and shoot a rod. its the time over 1/4 mile. otherwise wed all be going to meremere to see traps.

idiot


Erm, no you cant....if you pitch a rod halfway down the strip, you'll run a ratshit trap speed. Trap speed is the indication of how much power a car is producing, the ET shows how well it can put that power to the ground.

Might pay to do some study on the terms before calling other people idiots :roll:
Sykotic - what differentiates a TD04 on a 4AGE from one on a GSR Lancer or WRX or on a EP82 for that matter?

And before this gets out of hand, I think its time to be locked down. Looney - its your car so obviously your choice in turbo, and if you're happy with it thats the main thing :D
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Previous

Return to Palmerston North / Central North Island Region

Who is online

Users browsing this forum: No registered users and 14 guests