Shortened Shocks
Moderator: The Mod Squad
7 posts
• Page 1 of 1
Shortened Shocks
by Rolla J » Mon Jun 12, 2006 12:52 pm
I am wanting to get my starlet shocks shortened. Can someone reccomend somewhere in Rotorua thats shorten shocks ? And how much am i approximatly looking at ? Cheers
How about i give you a spoon and u eat my 4age
- Rolla J
- Toyspeed Member
- Posts: 28
- Joined: Mon Jan 02, 2006 12:36 am
- Location: R vegas
by evil_si » Mon Jun 12, 2006 2:28 pm
any engineering workshop can normally do it.
could try dynamic engineering, on allen mills rd.
scorpro engineering on view rd
just have them stripped, and know what you want done
ie how much they need shortened by
could try dynamic engineering, on allen mills rd.
scorpro engineering on view rd
just have them stripped, and know what you want done
ie how much they need shortened by
-
evil_si - Toyspeed Member
- Posts: 2353
- Joined: Sat Nov 01, 2003 6:19 pm
- Location: TAURANGA, Pyes Pa
by soopachargen » Mon Jun 12, 2006 2:30 pm
which ones do u want shortened?? the rears you can swap for ke70 wagon rears...
When in doubt, down and out.
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
-
soopachargen - Toyspeed Member
- Posts: 1598
- Joined: Thu Aug 05, 2004 1:54 pm
- Location: Silverdale
by Bling » Mon Jun 12, 2006 4:22 pm
soopachargen wrote:which ones do u want shortened?? the rears you can swap for ke70 wagon rears...
I've heard that before, any chance you know roughly how much shorter the wagon shocks are?
-
Bling - ** Moderator **
- Posts: 15990
- Joined: Mon Dec 22, 2003 9:02 pm
- Location: Quake City
by Dell'Orto » Mon Jun 12, 2006 6:35 pm
They might be shorter, but they'll be a totally different rate too, which might unsettle it a bit. Just ring Stocks or someone and harass them into looking for suitably shorter ones.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
Awsome
by Rolla J » Tue Jun 13, 2006 3:20 pm
Cheers evil_si , scorpro engineering were very helpful and only charge $35 to $60 depending on the shock . You saved me alot of money 
How about i give you a spoon and u eat my 4age
- Rolla J
- Toyspeed Member
- Posts: 28
- Joined: Mon Jan 02, 2006 12:36 am
- Location: R vegas
7 posts
• Page 1 of 1
Return to General Car Discussion
Who is online
Users browsing this forum: No registered users and 41 guests