Manual Conversion

[PopCorn]

ok so far i've got this

the parts list for manual conversion:

-modify loom
-shifter
-linkages.
-pivot stud
-thrust bearing
-copper pipe
-fly wheel with bolts
-clutch
-gearbox
-master and slave cylinders and lines
-pedal box
-brake pedal
-gear box top mount
-gear stick with cables
-interior trim
-reverse plug for top of gearbox

am i missing anything?can i use the auto ecu?and what wiring needs to be done? Thanks.

[demis]

the auto ecu works fine

the od light will start flashing to say tranny is not conected but you just remove the bulb from the dash

the other wiring is just to conect the plug for revers swithc on the top of the gear box and the wire going to the starter motor needs to be solded to gether where it normally go into the auto tranny to stop you from starting the car with out it in park


-modify loom

-pivot stud- normally on the gear box already

-thrust bearing- will come with new clutch kit

-fly wheel with bolts
-clutch
-gearbox
-master and slave cylinders and lines
-pedal box
-brake pedal
-gear box top mount
-gear stick with cables
-interior trim
-reverse plug for top of gearbox


gear box oil
clutch fluid

[PopCorn]

awesome thanks for all your help