4agze oil capacity (wrong dipstick...)

[~SlideWays~]

Its an '87 just bought it, i think the dipstick isnt the original because it reads over full with just 2 litres.

Could someone please tell me the correct capacity so i can mark it on the dipstick.

I have 3.5 litres in it at the moment.

[10k 20v]

3.5 litres with filter

[~SlideWays~]

3.5 litres with filter

Lol sweet then

Cheers

[bluemaumau]

bringin up dead post. is this correct, i always assumed that engines were 4l.

cuz mine reads over full at about 3l also

[trueno_20v]

mines a silvertop but it takes 3.5 with filter..

[aesc]

4AGZEs take between 3.2 and 3.5L I found

[bluemaumau]

thank you all

[gepsk8]

4litres with oil and filter, havent read high before, u guys let all the oil drain out?

[Mr Revhead]

ALL 4a engines take 3.2-3.5 litres from dead empty with filter change

and i guarantee iv changed more than you lot put together

4l is over full

[Pies]

i was told to just fill it untill it gets to the top of the motor... should this be 3.5l? cos so far its used about 6l

[XERO]

ALL 4a engines take 3.2-3.5 litres from dead empty with filter change

and i guarantee iv changed more than you lot put together

4l is over full

what about a 3s?

[XERO]

i was told to just fill it untill it gets to the top of the motor... should this be 3.5l? cos so far its used about 6l

and dont give people ideas... they will all come for you and hunt you down because they have farked there engines

[2LTR Rona]

what about a 3s?

3S-FE ~ 4.1L but i could be wrong

[Mr Revhead]

hmmm iirc 3s is around 3.8