What I did today...

General discussions on all non technical car related topics

Moderator: The Mod Squad

What I did today...

Postby matt dunn » Sat Sep 02, 2006 11:14 pm

Well, at 3.30 today may car looked like this,

Image

So a few hours later,

it now looks like this,

Image

Took a bit more than i thought.
Had to swap over all the accessories, replaced rear main seal, removed sump and fitted the baffeled one with turbo return etc etc.

Not too bad for a few hour works including going to have tea at the In-laws.

Matt
Tomorrow, hopefully, will get all the rest back together.

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby AJz » Sun Sep 03, 2006 12:12 am

damn good effort man :D
I had vtax :(
User avatar
AJz
Toyspeed Member
 
Posts: 3097
Joined: Sun Nov 14, 2004 2:11 am
Location: Dunners

Postby Bling » Sun Sep 03, 2006 12:44 am

I hope you lifted that in by hand..... its how real men do it anyway...

ok, so just poor people without engine hoists :oops:
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby crispy'86 » Sun Sep 03, 2006 9:22 am

Good effort Matt, just a feshen up for the new season for the engine was it?
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
User avatar
crispy'86
** Moderator **
 
Posts: 3548
Joined: Thu Jul 03, 2003 11:27 pm
Location: Chch

Postby flygt4 » Sun Sep 03, 2006 9:59 am

not a bad effort. whats the specs on the engine? same again ?
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby matt dunn » Sun Sep 03, 2006 12:43 pm

No, the old engine is still fine, just sitting in the corner waiting,

This one is a new setup, in the never ending search for more power.

Can't raise the boost as the class I race in has an 18psi limit,
so raised the compression ratio instead.
Will see how it goes next weekend hopefully.

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby crnkin » Sun Sep 03, 2006 4:58 pm

yes! high compression for the win!
kenny - "yours: 0hp @ 0rpm :D"
deaf_homo "currrently yes"

PLEASE get moderators to fight your fights for you if you are a cock master
User avatar
crnkin
Toyspeed Member
 
Posts: 1552
Joined: Thu Jun 03, 2004 8:48 pm
Location: Auckland

Postby matt dunn » Sun Sep 03, 2006 7:38 pm

Gone up from 7.8 to 9,

but the modified head and aftermarket cams are still on the other engine,

so will be interesting to see if there more power, less power, or the same?

Time ( and a dyno plot) will tell.

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby trueno_20v » Mon Sep 04, 2006 1:21 pm

Thinking of getting a bigger turbo?
ADMIN EDIT: signature too large
User avatar
trueno_20v
Toyspeed Member
 
Posts: 589
Joined: Wed Aug 10, 2005 9:12 pm

Postby Adamal » Mon Sep 04, 2006 1:38 pm

matt dunn wrote:Can't raise the boost as the class I race in has an 18psi limit


Now why would he want a bigger turbo when he can't go over 18psi? ;)
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Postby trueno_20v » Mon Sep 04, 2006 1:55 pm

Adamal wrote:
matt dunn wrote:Can't raise the boost as the class I race in has an 18psi limit


Now why would he want a bigger turbo when he can't go over 18psi? ;)


bigger turbo on same boost would make more power..?
ADMIN EDIT: signature too large
User avatar
trueno_20v
Toyspeed Member
 
Posts: 589
Joined: Wed Aug 10, 2005 9:12 pm

Postby flygt4 » Mon Sep 04, 2006 6:37 pm

would also sacrifice response , depends how responsive he wants it. tho with raised compression it should be able to spool a slightly larger turbo just as fast as before.
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby matt dunn » Mon Sep 04, 2006 8:27 pm

I may go for a bigger turbo when i go for an engine with more cc's.

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 38 guests