Arc eye

General discussions on all non technical car related topics

Moderator: The Mod Squad

Arc eye

Postby Caveman » Thu Sep 07, 2006 10:06 pm

So anyway me and dad where doing some welding today.

The one time he doesnt say 'alright' before lighting it up, I get flashed real bad.

It was manual arc, so pretty much the worse it could have been.

Everything went black but came to normal pretty quickly. I didnt think much of it until now, my eyes are a little sore and everything seems a little pink.

im worried ill have sore eyes for the next 3 days. Ive heard arc eye is where you burn the back of your eyes and it blisters up. My dads had it a few times and said if its happened to me im in for some pain :cry:

Has anyone had any experience with it?
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby AE82 FXGT » Thu Sep 07, 2006 10:13 pm

No, but heard many a horror stories about it.
I think at the time it's not so bad but when you wake up the next morning it's at its badest.
Previous: '85 AE82 FXGT, '92 AE101 GTZ, '92 AE101 GT-APEX, '04 SE3P RX8, '05 Mazda 6 MPS, '97 NA8C MX5, '03 GSX250, '08 ZX6R, '13 GROM
Current: '07 GRE156 BLADE MASTER G
User avatar
AE82 FXGT
Toyspeed Member
 
Posts: 1594
Joined: Thu Nov 04, 2004 1:51 pm
Location: Lower hutt

Postby flat_0ut » Thu Sep 07, 2006 10:17 pm

flashburn's another name for it i'm guessing? i remember it from monster garage
User avatar
flat_0ut
Toyspeed Member
 
Posts: 389
Joined: Thu Apr 27, 2006 9:41 pm
Location: Auckland

Postby Xyrath 86 » Thu Sep 07, 2006 10:21 pm

I've had it before and $&#$% does it suck! It feels like theres sandpaper rubbing on your eyes 8O, definatly the worst the next morning.
User avatar
Xyrath 86
Toyspeed Member
 
Posts: 792
Joined: Sun Dec 28, 2003 12:52 pm

Postby Rick » Thu Sep 07, 2006 10:26 pm

I got this out of medical book at home:

Flash burns are like sunburn in the eye and can affect both your eyes. Your cornea can repair itself in one to two days and usually heals without leaving a scar. However, if the flash burn is not treated, an infection may start. This can be serious and may lead to some loss of vision.

Seek urgent medical help:

You should see your doctor or go to the nearest hospital emergency department if you have symptoms including:

* Blurred vision
* Vision changes
* Seeing spots or flashes of light
* Pain on moving your eyes
* Worsening pain
* If you are concerned about your eyes for any reason.
Image
Corolla Levin AE-85 1984(Project car)
Corolla Runx Z (Runabout)
User avatar
Rick
Toyspeed Member
 
Posts: 1712
Joined: Fri Feb 06, 2004 6:52 pm
Location: West Auckland

Postby Caveman » Thu Sep 07, 2006 10:35 pm

Oh sh!t :cry:
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby Ae92typeX » Thu Sep 07, 2006 10:38 pm

lol, Ive had by accident and by stupidity afew times.
not to comfortable, but you should recover in a day dor so, especially if it was just the one flash.
Cant believe im still a member here.

http://toyspeed.blakjak.net/profiles/profile.php?id=113
User avatar
Ae92typeX
Toyspeed Member
 
Posts: 2639
Joined: Fri May 17, 2002 11:00 pm
Location: North Shore

Postby evil_si » Thu Sep 07, 2006 10:42 pm

one flash shoudnt do shit.
you do get a burning feeling when you get flahsed, normally goes away after a couple of minutes

arc eye generally only occurs when you have a lot of flash, when you weld or spot weld with no mask,

arc is probably the softest flash the flux coating tends to dull it a bit, mig and tig are a lot brighter.

ive had it when i was younger and thought i knew better, :roll:
did about 2 hours of spot welding with a mig , feels like sand in your eyes, and burns, the doctor prescribed some kick arse drops and was sorted in a couple of hours.
User avatar
evil_si
Toyspeed Member
 
Posts: 2353
Joined: Sat Nov 01, 2003 6:19 pm
Location: TAURANGA, Pyes Pa

Postby fangsport » Thu Sep 07, 2006 10:52 pm

i was a wee bit sore in the eyes after the flash.
3am the next morning it was like battery acid mixed with fine garnet in the eyes and unable to see properly for 12 hours afterwards , even after consultation with opthalmic? surgeon who done all he could.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby FrEsH » Thu Sep 07, 2006 11:01 pm

ah crap dylan...go sit in a dark room for hte next few days :P arc eye sucks :(
Image
User avatar
FrEsH
Toyspeed Member
 
Posts: 453
Joined: Mon Feb 14, 2005 7:42 pm
Location: Central Auckland

Postby Caveman » Thu Sep 07, 2006 11:02 pm

Im not an expert on welding, but I would have thought arc/tig would be the worst because MIG lights up hardly sfa when welding, need to get a lighter lens to see anything (about an 8 when mig, when arc welding I use an 11)

Maybe im just over reacting :lol: I was around heaps of it today with no helmet (stupid me) but one flash in particular really got me. Oh well I hope its all good tomorrow morning
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby Dell'Orto » Thu Sep 07, 2006 11:42 pm

Hahaha, you'll probably wake up at about 3 in the morning crying :lol: Its all good though, it does go away by itself.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Adamal » Fri Sep 08, 2006 12:44 am

How long were you exposed to it for? I'm guessing you weren't dumb enough to go "Hey, this isn't good for my eyes.... And it hurts.... I should probably look away.... Or close my eyes...... Yea...." and then look away, in which case, you will probably be agrovated for a few days, and then be sweet. With some new super powers that have been given to you by the radioactive lightwaves of the welding that allows you to see through chicks clothing. Bitchin.
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Postby xRyanx » Fri Sep 08, 2006 8:21 am

Adamal wrote:With some new super powers that have been given to you by the radioactive lightwaves of the welding that allows you to see through chicks clothing. Bitchin.


*Goes and starts welding*
ADMIN EDIT: oversized sig image removed - way too large

Adamal wrote:This is XRyanX. His car is so low that he has to drive over speed bumps diagonally. HARDEN THE $&#$% UP XRYANX!!
xRyanx
Toyspeed Member
 
Posts: 240
Joined: Tue Jan 17, 2006 12:39 am
Location: Hamilton

Postby RedMist » Fri Sep 08, 2006 8:27 am

Adamal wrote:With some new super powers that have been given to you by the radioactive lightwaves of the welding that allows you to see through chicks clothing. Bitchin.


But only the fat, old and "good looking challenged" ones.
The answer is Helmholtz!

Toyota ST185 Celica Rally.
Toyota ST205 Celica Rally.
Jimco/ Cosworth 350z Offroader - 609whp at 16psi
User avatar
RedMist
Old Skool User!
 
Posts: 3078
Joined: Tue May 21, 2002 12:39 pm
Location: Christchurch

Postby Caveman » Fri Sep 08, 2006 10:50 am

Well this morning wasnt too bad, I can still see but my eyes sting and are watering :cry: I dont think its very bad at all though.

Atleast I have this to show for it

Image

8) Cant wait to go racing, got two sets of 5 point harnesses too.

And unlike rick/pete my car goes forwards too :P :lol:
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby FrEsH » Fri Sep 08, 2006 12:30 pm

hey we still gotta drag :P
Image
User avatar
FrEsH
Toyspeed Member
 
Posts: 453
Joined: Mon Feb 14, 2005 7:42 pm
Location: Central Auckland

Postby bluemaumau » Fri Sep 08, 2006 12:45 pm

sick man im gona come have alook soon. did you do it all yourself? is it possible to get a cert for it if you do it yourself? i thought it had to be done professionally?
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby Caveman » Fri Sep 08, 2006 1:35 pm

Nope you dont have to get it dont by professional cage builders.

The person doing it must have the skills to do the job professionally though.

My dad has welding certificates. Even still I need to take it to a Tech Officer to get the tick before it can be homologated.

Its not something everyone can do though.

I had to borrow a mandrel bender to do all the work
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby Caveman » Fri Sep 08, 2006 1:36 pm

FrEsH wrote:hey we still gotta drag :P

lol your on. at meremere speedway of course :wink:
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Next

Return to General Car Discussion

Who is online

Users browsing this forum: Bing [Bot] and 52 guests