FTW? TRD Curren 2.2l?

[frost]

well i have this and i have that.... wishful thinking unless pics can be seen.

[fangsport]

well i have this and i have that.... wishful thinking unless pics can be seen.

Fangsport Riverbed Developments FTW

[TTEETT]

01 TTE IS200 Compressor.

[JT]

TOM'S build a 2.2l 3SGE by the way, and a 1.8l blacktop 4AGE

This I gotta see. Figures, pics, proof?

[big_boy]

il put it all up when i get the scanner going @ the moment the only copy i have on this PC is in japa

[Silent Knight]

I don't know the full specs of the Tom's 3SGE but I have heard it mentioned on a couple of places.

http://www.kineticf3.com/team.htm

[RomanV]

TOM'S build a 2.2l 3SGE by the way, and a 1.8l blacktop 4AGE

This I gotta see. Figures, pics, proof?

Yep I've definitely seen pics etc of the TOMS 4age stroker engine, cant remember where. I'm sure that it was 1900cc though from memory? or 1700? It seemed some oddball displacement, I'm sure it wasnt the same as the 7AFE.

But anyway, I dont know why you'd go to the expense of a toms stroker kit...

Given that so many people have made 2.2l 3SGEs using 5SFE bits, and 1.8 litre 4AGEs using 7AGE bits, with a fair amount of success...

[TRD Man]

The TOM'S 2.2 3SGE is a Gen 3 bored & stroked to 2253cc. Forged pistons, F3 camshafts, F3 headgasket, TOM'S TEC11 ECU & light flywheel.
172kW & 255Nm

Their 1.8 blacktop runs a 7A shortblock and their own Grp A pistons, 264 degree cams, TEC11 ECU and a special flywheel.
They claim 147kW & 196Nm.

Both engines are built to order. Ex factory is in excess of 15k each.
I could probably do a group buy if anyone's keen

[Pelo]

4AGE:
Specification /1.6L specification
displacement 1,587cc,
power 132kW (180ps) /7,800rpm
torque 176N.m (18.0kgf-m) /5,700rpm &
cams/duration IN264 EX264
Gr.A pistons
TEC2 tuning computer
　
Specification /1.8L specification
displacement 1,761cc
bore / stroke 81.0 X 85.5
power 147kW (200ps) /7,600rpm
torque 196N.m (20.0kgf-m) /5,400rpm
cams/duration IN264 EX264,
Gr.A pistons
TECS tuning computer
7A short block
custom flywheel



3SGE specification:
displacement 2,253cc
bore / stroke 87.0 × 94.8
power 172kW (235ps) /6.800rpm
largest torque 255N m (26.0kgf/-m) 4,400rpm
2.2 liter pistons
2.2 liter crank
F3 head
T.E.C.2 tuning computer
lightweight flywheel


Straight from the TOMS website http://www.tomsracing.co.jp
The TOMS TO20 and T111 were featured in Gran Turismo 2, and were terrific fun to race

[frost]

fangsport that is a sweet car its going into my collection of old school rides pic's folder.

[fangsport]

fangsport that is a sweet car its going into my collection of old school rides pic's folder.

the photos don't do it justice.
it's even rougher in the flesh!!
it's so far removed from a factory TE71, that it isn't really one anymore
i do draw praise from the local permit issuing steward regarding my painting technique though, a mouthful of paint then sneeze!