identify this front bumper

[deaf_rattle]

After seeing this, i think ill go the same route.
IT uses the top part of the stock bumper so the stock indicators are used, but the bottom 3/4s are aftermarket.

does anyone know how much roughly it would cost to have it grafted to the stock bumper?

cheers

[big_boy]

if you do one for your MA61 i would be intersted in bying a 2nd one off you for mine id probly change it a slight bit when it got here but would still like some were to start from

[UTERUS]

If you are feeling handy then get some sheets of fibreglass and graft one on yourself, spend a bit of time thinking about where to cut and what you want it to look like and it could come out looking fairly good.

[Si]

that duct looks like a Turbo A duct from a MK3.
Sure its not a mk3 kit?


Greddy front w/turbo-a duct, regulus nose, sides, rear, wing

[deaf_rattle]

yeah, the duct/gril is turbo A but the front looks like a skyline aftermarket or similar

[MrDori]

shame the back is so ugly on the mk2 supras, that front is cool looking!

[HELBND]

actually those bumpers look almost identical, on the mk3 and the mk2

[deaf_rattle]

shame the back is so ugly on the mk2 supras, that front is cool looking!

well i think the rear ends are good

[Si]

actually those bumpers look almost identical, on the mk3 and the mk2

Thats what i thought. they look exctly the same.



but this, now this is just 100% hot:

[RomanV]

My first thought when I saw that front was "FC RX7".

[Adamal]

Mine was 'R32 GT-R'

[postfach]

Although the GT-R front is really similar, I have to say it looks to me exactly like the one in the pic posted by Si, minus the bit on the top of the duct. The rest of the vents/holes look identical.

[Si]

http://www.supraforums.com.au/forum/att ... 1170999521


I win the prize

[deaf_rattle]

nice one
got more details?

[Si]

http://www.i-m-racing.com/gracgredfron.html


Gracer (GReddy) Front Bumper


Gracer aero kits are designed to enhance your vehicle's appearance, while providing good aero dynamics. It also helps in handling and providing adequate amounts of air flow to critical engine components, like intercoolers and turbochargers. Fully tested and constructed of the finest composite materials to fit your car with only minimal prepping for painting.

[Zestripper]

Looks like its not blended in, just cut around. I like it.

[Si]

If you find one of these kits id possibly be keen to buy one as well, ie land one here, make a mould and then make a few replicas