noisy silvertop..

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

noisy silvertop..

Postby EVL20V » Mon Apr 16, 2007 9:09 pm

ok, so the 20v silvertop blows plenty of smoke when you floor it.

but at idle it sounds like a diesel :lol: not your normal ticking like an rb20 or b16a, but this is more chronic, and quite frankly you would need to unbolt the exhaust to drown out the sound :lol:

oil level is sweet, compression is sweet, no knocking or anything.

any suggestions? cheers
60% of the time it breaks every time
User avatar
EVL20V
Toyspeed Member
 
Posts: 931
Joined: Fri Dec 10, 2004 12:06 am
Location: where?

Postby TRD_ZERO » Mon Apr 16, 2007 9:42 pm

What colour smoke?
User avatar
TRD_ZERO
Toyspeed Member
 
Posts: 1077
Joined: Sun Jul 16, 2006 12:24 pm
Location: Howick

Postby EVL20V » Mon Apr 16, 2007 9:48 pm

black/blue, so basicly rings had it, but maybe steam seals?
60% of the time it breaks every time
User avatar
EVL20V
Toyspeed Member
 
Posts: 931
Joined: Fri Dec 10, 2004 12:06 am
Location: where?

Postby bluemaumau » Tue Apr 17, 2007 12:18 am

is it facelift ? sergei has explained a few times about how the injectors vary, have a search

edit:http://forums.toyspeed.org.nz/viewtopic.php?t=56311&start=0
4AGTE AE101 COROLLA - 90%

Where the $&#$% is that oil leak coming from /club

looking for enkei RP01 center caps (white)
User avatar
bluemaumau
Toyspeed Member
 
Posts: 4087
Joined: Sun Oct 16, 2005 7:08 pm
Location: SYDNEY, NSW

Postby JRS » Tue Apr 17, 2007 6:14 am

could be the infamous VVT cam gear rattle.
meh.....
JRS
Toyspeed Member
 
Posts: 112
Joined: Thu Oct 02, 2003 9:32 pm
Location: Dunedin

Postby trueno_20v » Tue Apr 17, 2007 4:25 pm

same as what mine done , vvt pulley.
ADMIN EDIT: signature too large
User avatar
trueno_20v
Toyspeed Member
 
Posts: 589
Joined: Wed Aug 10, 2005 9:12 pm

Postby Levin » Thu Apr 19, 2007 11:52 pm

I used to have an AE101 Levin, and mine too rattled like crazy. Apparently it was because the shims were quite worn. Like yours it smoked a bit under hard acceleration, but the compression was fine, and so was the oil. If your problem is with the shims too then its just an annoying noise, nothing to worry about. BTW mine had done about 220ks
Levin
Toyspeed Member
 
Posts: 60
Joined: Sat Nov 12, 2005 8:35 pm


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot] and 8 guests