Bellhousing identification and shifter positions

[KinLoud]

Thought I would post up pics of some bellhousings to help people work out what they have got...
G bellhousing off a 1981 GX61 Chaser 1GEU motor.


S bellhousing - SX6x Mark II, Cressida etc. Also C bellhousing the same - CA60 Carina wagon, CM30? Liteace with G52 gearbox (same bolt pattern as W series gearbox).


Y bellhousing - YX70 Mark II wagon, YM30 Liteace with G52 gearbox (same bolt pattern as W series gearbox). Can be used on a S motor to put starter on other side of block if the top right hole is slotted See the hole in the top right is slightly lower than the S/C bellhousing.


R bellhousing - RX30? Cressida


M bellhousing - MA60, MA70 Supras


SHIFTER POSITIONS

[l1ttle_d3vil]

anyone wana do me a favour and post up a front on pic of their 4a series bellhousing? preferably 4a - t50. and this should be faq'd! (if its not already, wasnt last time I looked)

[ps165]

anyone wana do me a favour and post up a front on pic of their 4a series bellhousing? preferably 4a - t50. and this should be faq'd! (if its not already, wasnt last time I looked)

not ideal, but only one i got.

T50 4AGE - AE86, AA63 celica, carina, + others






W5x > 3TGTE - TA63 celica, gt corona, plus some others






R154 > 1JZ - soarer, supra, possibly others








R154 > M - supra

[Rick]

Heres is my 3A to T-50 bellhousing, same as a 4A-T-50 housing but with the clutch fork on the passengers side.

[l1ttle_d3vil]

someone want to FAQ this? quite a handy reference to have...

[Mr Revhead]

agreed.
anything else anyone wants to add?

[KinLoud]

Warwick - I still have a couple more... plus better pics of some already posted.
If you FArQ this we can still post to add more?
I'm working on more shifter positions... also

Ken
Ham
021 408 863

[Mr Revhead]

no, only admin and mods can post in the FAQ section

so iv done this:

http://forums.toyspeed.org.nz/viewtopic.php?p=574282#574282

when/if this thread is finished it can be moved

[l1ttle_d3vil]

can someone please do me a massive favour...
if you have a 2c / 3s bellhousing sitting around, can you measure up between these points for me please?? to the centre of the bolt holes. also need the distant between the starter motor bolts too.

hope it makes sense.

thanks.

[AE25]

edit: originally asked what from to help someone.. but research suggests L series diesel (2L, 3L, 2L-T, 3L-T) bell housing, but yet to find 100% definate confirmation pic.

[matt dunn]

Interesting thing if found the other day,


all the w series bellhousings are labelled on the surface that mounts to the gearbox, so if you remove the housing there is a letter in there.

I now know the mystery bellhousing I have is an L series diesil one.