****best aftermarket ecu for 4agze****

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

****best aftermarket ecu for 4agze****

Postby corolla gt » Wed Jun 13, 2007 6:22 pm

hi guys i have put alot of thought into it and now have decided to go for the aftermarket ecu for my 4agze tht im putting my starlet.....i have got the 4agze loom cut down and shortend for rwd but it will b a bit small and my starlet is already 4age wired up.

i thought bout it and now i think i will keep all the 4age bluetop loom in my car and get a better computer for the turbo

it will probley save me money as i will have to get loom quiet a bit longer and then my alternator will be on exhaust side and all my bluetop wiring will b a big waste...

so could u guys give me sum good examples of pretty good ecus for 4agze ....i dnt really have the money for link :lol: but yea was thinking around the lines of piggy back ecu
CURRENT:TOYOTA 1993 Hilux surf
OLD:TOYOTA 1995 HIACE SUPERCUSTOM TOYOTA SPINTER GT 1985,TOYOTA COROLLA GT 1986 (SMALLPORT)
User avatar
corolla gt
Toyspeed Member
 
Posts: 181
Joined: Sun Oct 02, 2005 10:07 am
Location: wellington ,lower hutt

Postby escortman » Wed Jun 13, 2007 7:29 pm

y not save u can get links for 1000 buks, i think they did a groupbuy not long ago and G3 was only 1200 from memory, plus links have fuk all sensors etc to run so less wiring
toyota supra 1996 2jzgte t64 turbonetics
Was 300hp on 10psi with stock twins, hopefully on similar boost be around 400hp

4x4 toyota blizzard offroader

widebody markII escort panelvan

RIP 13sec AE82 fxgt 4agte 5psi TD05 20g
escortman
Toyspeed Member
 
Posts: 1651
Joined: Thu Sep 29, 2005 4:14 pm
Location: West Auckland

Postby TRD_ZERO » Wed Jun 13, 2007 7:50 pm

Get a link support NZ
User avatar
TRD_ZERO
Toyspeed Member
 
Posts: 1077
Joined: Sun Jul 16, 2006 12:24 pm
Location: Howick

Postby slighty_sykotic » Wed Jun 13, 2007 7:52 pm

Um, what are you going to put the piggyback computer onto? the std bluetop ecu?

Far far far far far far better off getting the 4agze loom in there.

Or if you go aftermarket, then link is about the cheapest. Find a second hand older verison LEM. $500ish
Proud member of the "No Irrelevant keywords in TM" campaign
User avatar
slighty_sykotic
Toyspeed Member
 
Posts: 1749
Joined: Sat Dec 04, 2004 8:38 pm
Location: Palmerston North

Postby l1ttle_d3vil » Wed Jun 13, 2007 9:19 pm

there was a turbo link - which had been upgraded to an lem v5 - on trademe for about $350 last week...
Image
User avatar
l1ttle_d3vil
Toyspeed Member
 
Posts: 2639
Joined: Sun Jun 27, 2004 10:22 pm
Location: Bay of Plenty

Postby corolla gt » Thu Jun 14, 2007 1:08 am

are the turbo links hard to install though have been told by speedtech that they are and they dnt touch them

i dnt really want to destroy all my bluetop wiring though as my car is all wired up and has worked allgud plus my alarm is connected up sumhow to my computer to so i will have 2 get tit all changed and then get the wiring all madeto fit my car.

....i think it will b a bit of a mission

i looked on trade me and there is a trust E ecu piggy back for 450 i am keen on thatthe guy said it will b good for a ae86 and my bluetop motor is a ae86 originally
CURRENT:TOYOTA 1993 Hilux surf
OLD:TOYOTA 1995 HIACE SUPERCUSTOM TOYOTA SPINTER GT 1985,TOYOTA COROLLA GT 1986 (SMALLPORT)
User avatar
corolla gt
Toyspeed Member
 
Posts: 181
Joined: Sun Oct 02, 2005 10:07 am
Location: wellington ,lower hutt

Postby slighty_sykotic » Thu Jun 14, 2007 1:33 am

seriously, if your not going to listen to us, why ask?

Piggy backs are great for small changes, ie, adding a bigger turbo to an already turbo.

In my opinion, going from non turbo to turbo needs more than a piggyback.

And if your only reason is that you don't want to mess up your loom, then your reasons are really backwards.... Plus the fact that emanage is going to have to be split into your loom anyway.

--Sykotic
Proud member of the "No Irrelevant keywords in TM" campaign
User avatar
slighty_sykotic
Toyspeed Member
 
Posts: 1749
Joined: Sat Dec 04, 2004 8:38 pm
Location: Palmerston North

Postby corolla gt » Thu Jun 14, 2007 6:08 pm

ok then so putting the agze loom in would b a better idea i think the ze loom will fit into my rwd bluetop inklet and stuff so yea could be allgud or maybe a link like u guys said i guess
CURRENT:TOYOTA 1993 Hilux surf
OLD:TOYOTA 1995 HIACE SUPERCUSTOM TOYOTA SPINTER GT 1985,TOYOTA COROLLA GT 1986 (SMALLPORT)
User avatar
corolla gt
Toyspeed Member
 
Posts: 181
Joined: Sun Oct 02, 2005 10:07 am
Location: wellington ,lower hutt


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 28 guests