Caldina remove door panels

Phat beats and out-of-luck crooks. Again, read the Disclaimer first.

Moderator: The Mod Squad

Caldina remove door panels

Postby magnazan » Fri Nov 09, 2007 4:45 pm

Need to get at my front speakers in a 98 Caldina. Without yanking away at the door panels is there some trick to getting them off? I've taken out the screw grommets is it just a case of pulling and it'll pop off?
User avatar
magnazan
Toyspeed Member
 
Posts: 77
Joined: Fri Jul 20, 2007 4:53 pm
Location: Tha shore fo sure

Postby bbq1988 » Fri Nov 09, 2007 4:57 pm

lift up the arm rests, they should pop off (Drivers one has acouple of screws in the pocket thingy
Baked, Not Fried.
bbq1988
Toyspeed Member
 
Posts: 1379
Joined: Tue Jun 06, 2006 10:06 am
Location: Te Kuiti, Land of the wrong white crowd

Postby magnazan » Fri Nov 09, 2007 7:22 pm

Right got the 2 screws out of the drivers arm rest. Also removed the screw from the door handle. The panel is practically hanging off now but i can't figure out how to get it over the door handle frame. Does the door handle fram pop off as well or is there something i'm missing?
User avatar
magnazan
Toyspeed Member
 
Posts: 77
Joined: Fri Jul 20, 2007 4:53 pm
Location: Tha shore fo sure

Postby snwtoy » Fri Nov 09, 2007 7:32 pm

magnazan wrote:Right got the 2 screws out of the drivers arm rest. Also removed the screw from the door handle. The panel is practically hanging off now but i can't figure out how to get it over the door handle frame. Does the door handle fram pop off as well or is there something i'm missing?


Handle frame needs to pop off too. Hold on I'll dig up a picture.
User avatar
snwtoy
Toyspeed Member
 
Posts: 5810
Joined: Mon Aug 30, 2004 7:54 pm
Location: Auckland

Postby magnazan » Fri Nov 09, 2007 7:34 pm

Do i just pull on the frame until it pops off? Don't want to break anything :?
User avatar
magnazan
Toyspeed Member
 
Posts: 77
Joined: Fri Jul 20, 2007 4:53 pm
Location: Tha shore fo sure

Postby snwtoy » Fri Nov 09, 2007 7:34 pm

You need two small screwdrivers or similar, to lever these tabs, one up and one down to pop it off...

Image
User avatar
snwtoy
Toyspeed Member
 
Posts: 5810
Joined: Mon Aug 30, 2004 7:54 pm
Location: Auckland

Postby magnazan » Fri Nov 09, 2007 7:35 pm

Awesome cheers i'll go try it :)
User avatar
magnazan
Toyspeed Member
 
Posts: 77
Joined: Fri Jul 20, 2007 4:53 pm
Location: Tha shore fo sure

Postby snwtoy » Fri Nov 09, 2007 7:36 pm

Also, once you get to the speaker you'll find they're rivetted in. The rivets are soft, so a drill or even some yanking with pliers will get them out eventually.
User avatar
snwtoy
Toyspeed Member
 
Posts: 5810
Joined: Mon Aug 30, 2004 7:54 pm
Location: Auckland

Postby magnazan » Sat Nov 10, 2007 7:37 am

I haven't got standard speakers in mine. My drivers front speaker stopped working so i just made sure the cables were all sweet. Working fine now :)
User avatar
magnazan
Toyspeed Member
 
Posts: 77
Joined: Fri Jul 20, 2007 4:53 pm
Location: Tha shore fo sure


Return to Car Audio / Security

Who is online

Users browsing this forum: No registered users and 19 guests