Toyspeed.org.nz Message Board

by **trd-drifting** » Tue Nov 20, 2007 4:06 pm

This makes me sound like a noob but who tests injectors around Hamilton/Te Awamutu area, also how much will it cost me.

Ive got a set of 6 injectors thought i might pop them in before i get the car a tune might help a little bit

Josh

WTB: Exterior drivers door mould for a *a70 supra

by **atmosports** » Tue Nov 20, 2007 6:33 pm

John Butler does them, think he calls himself tuning & perfrormance or something like that, else alot of turbo crowds can do them.

by **trd-drifting** » Tue Nov 20, 2007 8:59 pm

How much roughly would i expect to pay roughly and where is he based.

by **atmosports** » Wed Nov 21, 2007 6:24 pm

Haven't got his details in front of me, but I believe he's round the Frankton area from memory, I know how to get there but not the actual address. I can probably get his details over the weekend if I remember.

As for the costs, I have no real idea as I do my own, but it really depends on who does them & if you start replacing o-rings/seals/filter baskets etc. You can spend a fair bit of time if your trying to equalise flow rates & spray patterns sometimes. I'd say somewhere in the $50-100 mark for a set of 4 is probably in the ballpark.

Could always ring someone like Mitchell Motorsport & ask them if they do it or can point you in the direction of someone who can. Could be worth a try as I know a guy from up here who was working out of there shop or doing work for them & he was pretty good with injectors & stuff.

by **IH8TEC** » Wed Nov 21, 2007 7:16 pm

think i payed $25ish per injector, with new little filters, seals and flow tested, up here in auckland. around that is a good price

by **spencer** » Wed Nov 21, 2007 9:11 pm

take them to diesel and turbo on k-drive extension they hooked me up hard standard rate is $20 an injector. I had 12 1gge injectors and turned out 8 of them were stuffed! they only charged my $100 and then tested another random set of six I found as replacements for free even did it on a saturday. Top notch place really hooked me up

by **spencer** » Wed Nov 21, 2007 9:14 pm

they side feed? if you want new o-rings give me a pm get them free

by **trd-drifting** » Thu Nov 22, 2007 2:17 pm

Yea they are side feed. Just standard 2jzgte ones. Thanks for the info everyone much appreciated.

by **Phothog** » Thu Nov 22, 2007 6:41 pm

theres Turbo & Diesel Specialists 281 Kahikatea drive 07-847-3339

or Diesel Turbo & Automotive 19 Colombo Street 07-846-6696 ( i think)

Chris.

Toyspeed.org.nz Message Board

Who tests injectors

Who tests injectors

Who is online