Gen2 3sgte
Moderator: The Mod Squad
10 posts
• Page 1 of 1
Gen2 3sgte
by JustinSpiderholden » Tue Dec 04, 2007 3:39 pm
Is it possible to remove the water cooling collar before the oil filter on the gen 2 3sgte. Reason for doing this as due to a lack of room for the remote filter colar, was thinking becasue i am running a oil cooler the factory water cooling could be removed jsut want to know if this is possible and if it is what is best to use to replace it? Motor is mounted in a ae86
- JustinSpiderholden
- Toyspeed Member
- Posts: 978
- Joined: Thu Jun 06, 2002 11:40 am
by KinLoud » Tue Dec 04, 2007 3:45 pm
Yes I am sure you can remove oil cooler - the oil filter will screw onto the block if you fit the usual bit that screw into the block that the filter screws onto.
If you have a separate oil cooler all is sweet.
Ken
Ham
021 408 863
If you have a separate oil cooler all is sweet.
Ken
Ham
021 408 863
I used to think that the orange and green tictacs gave you special powers. The orange ones would make you stronger and the green ones would make you faster. So i used to eat some green ones and run around my lounge as fast as i could, then eat the orange ones and try to pick up the sofa. I wish it were true!
-
KinLoud - ** Moderator **
- Posts: 2893
- Joined: Thu May 16, 2002 7:39 pm
- Location: Auckland
by JustinSpiderholden » Tue Dec 04, 2007 4:27 pm
KinLoud wrote:Yes I am sure you can remove oil cooler - the oil filter will screw onto the block if you fit the usual bit that screw into the block that the filter screws onto.
If you have a separate oil cooler all is sweet.
Ken
Ham
021 408 863
where do i find the usual bit that screw's into the block? Would i be able to pliage a gen2 3sge for these bits?
- JustinSpiderholden
- Toyspeed Member
- Posts: 978
- Joined: Thu Jun 06, 2002 11:40 am
by JustinSpiderholden » Thu Dec 06, 2007 1:09 pm
Trls250s wrote:Throw it away and put a 4age in it. Haha
Why so I can have a total lack of tourqe, I have already ripped the 4age out jsut need to know what i need to get to replace the oil cooler once I remove it
- JustinSpiderholden
- Toyspeed Member
- Posts: 978
- Joined: Thu Jun 06, 2002 11:40 am
by Trls250s » Thu Dec 06, 2007 10:19 pm
The oil filter should just bolt onto where the oil cooler when. It is just a color (if thats how u spell it).
4a-ge noun for-ay-gee
1600cc of Awesome
AE86 noun aye-ee-ate-six
Rusty Corolla
www.GARAGEDORI.com
1600cc of Awesome
AE86 noun aye-ee-ate-six
Rusty Corolla
www.GARAGEDORI.com
-
Trls250s - Toyspeed Member
- Posts: 636
- Joined: Wed Jul 12, 2006 2:50 pm
by JustinSpiderholden » Fri Dec 07, 2007 11:23 am
KinLoud wrote:Yes I am sure you can remove oil cooler - the oil filter will screw onto the block if you fit the usual bit that screw into the block that the filter screws onto.
If you have a separate oil cooler all is sweet.
Ken
Ham
021 408 863
What is this usal bit and where will i get one from once i remove the filter
- JustinSpiderholden
- Toyspeed Member
- Posts: 978
- Joined: Thu Jun 06, 2002 11:40 am
by JustinSpiderholden » Fri Dec 07, 2007 11:24 am
KinLoud wrote:Yes I am sure you can remove oil cooler - the oil filter will screw onto the block if you fit the usual bit that screw into the block that the filter screws onto.
If you have a separate oil cooler all is sweet.
Ken
Ham
021 408 863
What is this usal bit and where will i get one from once i remove oil cooling collar
- JustinSpiderholden
- Toyspeed Member
- Posts: 978
- Joined: Thu Jun 06, 2002 11:40 am
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 9 guests