***how to hook up tacho to link ecu****

[stefegg89]

im trying to suss my monster tacho to the link ecu and im not to shore how i have been told you have to find a wire on the lnik ecu 1st to hook it to and i have twin coil packs im not to shore bout them either is it simple

[AceSniper]

depends what version link?
older ones have a shiftlight/tach output that you can config also the 3rd ign channel is tach.

not sure with newer ones but no doubt there will be a output wire you can config to tach.

[matt dunn]

running a tacho that is designed for coil -ve signal off the link signal,
is hit and miss if it works ( mostly miss as they dont)

as the link puts out a square wave and most tacho's look for the high voltage coil -ve spike.

Get a tach adapter off a mitsi, someone on here should have one.

[spoonza6]

i got a spare one
where you located?

its a tacho interface from a dual coil pack from a 4G63

[stefegg89]

the tacho i got is a autogauge 5inch with a big shift lite

will i need one of those adapters

[spoonza6]

more important
what link do you have?

[matt dunn]

the tacho i got is a autogauge 5inch with a big shift lite

will i need one of those adapters

Yes because autogauge is a crap brand, and wont trigger off a link signal

[matt dunn]

more important
what link do you have?

doesn't matter as early or late, they all put out a square wave signal,
which cheap brand tacho's dont normally run off.

[stefegg89]

its a autometer sorry the black 1 they retail at like 350$ still

[3T-Rona]

i have a tacho interface in Tauranga if you want one.