Changing brake lights - ST183

[GTTpower]

Ok my brother has a ST183 Celica and the brake light bulbs need replacing, had a look in the boot and covering the lights is a big steel body panel with wires coming out, and for the life of me I couldnt figure out how to change them out.

Is there an obvious/easier way of doing it that Ive missed?

[Bling]

General rule of thumb on removal of parts is to unbolt things until what you want off.... falls off.

Surely lights can't be THAT complicated.

[GTTpower]

General rule of thumb on removal of parts is to unbolt things until what you want off.... falls off.

Looking for an answer thats a bit more specific but thank you, thats usually what I do anyway

[Bling]

Then you should have fixed it already

[Boosted_162]

Do it from the outside of the car, not the inside. Start by pulling the vent bit off from the side iirc. Cant remember where the bolts are, but i do remember its a sealed unit seperate from the car, and you need to take the cluster out to change bulbs.

[Scotty]

there are screws under the vent on the corner