Toyspeed.org.nz Message Board

by **Prymal** » Fri Mar 20, 2009 8:29 pm

Anyone off the top of their heads know the distace bolt to bolt for a bride seat for mounting

I have a feeling i have a bride suitablle rail for an altezza but i want to make sure before posting it up to sell ( WAS adapted to an Sr2 recaro )

by **Boosted_162** » Fri Mar 20, 2009 9:14 pm

From what i could roughly measure (cant give you an accurate one as both mine are installed) but centre of bolt to centre of bolt is just under 29cm, its about 288mm. If you need something more accurate i dont mind pulling the SW20 one out and measuring it.

Oh and these are side mount type Zeta IIIs (2008 model)

by **postfach** » Sat Mar 21, 2009 8:59 am

Interesting, I'm pretty sure thats the same as the bolt spacing on my Sparco.

by **Prymal** » Sat Mar 21, 2009 5:59 pm

theres alot of interchancablity in there between brands - though i know this rail wont directly fit a SR series recaro and it might as well goto a home that can make use of it - Ill measure it up in the morrow then advertise it for sale

Altezza owners - Keep an eye on this thread

by **TRD Man** » Sat Mar 21, 2009 11:08 pm

We've got a Bride seat here. I measured it earlier today. 288mm as stated is correct.

by **Prymal** » Mon Mar 23, 2009 10:55 am

sweet - cheers guys !

Toyspeed.org.nz Message Board

bride seat bolt pattern _ altezza aftermarket seat rail

bride seat bolt pattern _ altezza aftermarket seat rail

Who is online