Caldina GTT steering alignment

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Caldina GTT steering alignment

Postby archie » Mon Mar 23, 2009 10:16 am

Can anyone help me with the factory steering alignment figures (Toe in / out, Camber, Caster ) for a 1997 Caldina GTT? :)


Archie
archie
Toyspeed Member
 
Posts: 3
Joined: Sun Mar 22, 2009 12:38 am
Location: England

Postby cedwards » Tue Mar 31, 2009 7:01 pm

probably a bit late but here's what my last alignment sheet had on it:

Specifications:
front: Min / Max

Caster 0.5 / 2.00 degrees
Camber -1.08 / 0.42
Toe -0.3 / 0.9
total -0.6 / 1.7

Rear:

Camber -1.58 / -0.08
Toe 0.6 / 1.7
total 1.1 / 3.5

Secondary Angles:
SAI 13.33 / 13.33
cedwards
Toyspeed Member
 
Posts: 114
Joined: Fri Jun 08, 2007 1:00 pm
Location: North Shore

Postby archie » Sat Apr 04, 2009 8:38 am

Thank's for that :D I'll use it as a comparison for my GTT, Ive got a slight shake on the steering which is not the wheel balance :?:


Archie
archie
Toyspeed Member
 
Posts: 3
Joined: Sun Mar 22, 2009 12:38 am
Location: England

Postby cedwards » Sun Apr 05, 2009 8:20 am

warped brake disc?
cedwards
Toyspeed Member
 
Posts: 114
Joined: Fri Jun 08, 2007 1:00 pm
Location: North Shore

Postby archie » Sun Apr 05, 2009 10:03 am

No, Discs all replaced nice and tru, but one possibility is that when I bought it the aftermarket wheels did not have any spigot rings fitted which may have caused the wheels to run slightly off centre wearing the tyres unevenly, although there is no uneven wear to see, it would'nt take much, and the tyres are to good to replace at the moment!
What tyre pressures would you recomend with a 205/55/16 tyre, the standard pressure or something else?
archie
Toyspeed Member
 
Posts: 3
Joined: Sun Mar 22, 2009 12:38 am
Location: England


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 8 guests