AE92 Blacktop Conversion

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby Mr Revhead » Tue May 11, 2010 8:57 am

Roy wrote:ignoring arguments between ST & BT... surely the price of an ae101 ST ftw... pretty cheap these days.... especially if you are still at uni! ae101s ST's make ok runabouts but I guess at the sacrifice of power...


Plenty of good ones around still. This would be my preffered option
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Mike228 » Sun May 16, 2010 2:53 pm

deaf_rattle wrote:
callum wrote:I put a silvertop in my ae92 and think it's well worth doing. It's alot
more fun to drive and fuel economy is better than the 4af. For my insurance I just rang and told them Id put a fuel injected
motor in of the same displacement and it didn't change my insurance
at all.


they say that until you claim!


All calls are recorded by the companies, and that recording should be as good as having written down on paper.
Mike228
Toyspeed Member
 
Posts: 50
Joined: Wed Feb 03, 2010 12:58 am

Postby Dell'Orto » Sun May 16, 2010 3:10 pm

Yeah but you're talkingabout insurance companies...when it comes to paying out, if its not written in triplicate, signed by 8 JP's, a Dr and 3 imported shamen, then they'll weasel out of paying.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Mr Revhead » Sun May 16, 2010 3:17 pm

Mike228 wrote:
deaf_rattle wrote:
callum wrote:I put a silvertop in my ae92 and think it's well worth doing. It's alot
more fun to drive and fuel economy is better than the 4af. For my insurance I just rang and told them Id put a fuel injected
motor in of the same displacement and it didn't change my insurance
at all.


they say that until you claim!


All calls are recorded by the companies, and that recording should be as good as having written down on paper.


But they have the recording.... Not you. So I bet it "doesn't exsist" if the contents will be in your favour
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby rollaholic » Sun May 16, 2010 3:39 pm

'sorry sir i wasnt able to find the call in question'
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby callum » Mon May 17, 2010 1:27 am

My sister works for Ami so she makes sure everything is legit.
callum
Toyspeed Member
 
Posts: 146
Joined: Thu Feb 27, 2003 6:51 pm

Postby ChaosAD » Mon May 17, 2010 8:20 am

AE92-5ONIC wrote:
I'm planning a 6 month or so engine build as i'm at uni at the moment, don't have too much spare time, a GZE may be on the cards, however, sourcing a reasonable condition GZE motor maybe a little more trickier than a low km blacktop.


If your going to be rebuilding it then just rebuild your stock engine with gze pistons
User avatar
ChaosAD
Toyspeed Member
 
Posts: 2212
Joined: Wed Sep 03, 2003 11:40 am
Location: Whangarei

Postby AE92-5ONIC » Mon May 17, 2010 10:45 pm

If your going to be rebuilding it then just rebuild your stock engine with gze pistons


I want to drive the car while I build an engine.
User avatar
AE92-5ONIC
Toyspeed Member
 
Posts: 134
Joined: Sun Apr 25, 2010 12:00 am
Location: Hamilton, NZ

Postby gmacrae » Fri Jun 11, 2010 9:56 am

Dont waste your money on a silvertop, been there done that, didnt go any better than the stock bigport till i got it all re-wired with the blacktop ecu/map sensor etc.

I'm slowly building a fresh blacktop motor with minor mods (silvertop rods, port matching/smoothing etc) to go in there in place of the silvertop.

Bin the p/s and a/c while you have everything out, good way to shed some weight (and tone the arm muscles :D)
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

Postby AE92-5ONIC » Fri Jun 11, 2010 11:32 am

gmacrae wrote:Dont waste your money on a silvertop, been there done that, didnt go any better than the stock bigport till i got it all re-wired with the blacktop ecu/map sensor etc.

I'm slowly building a fresh blacktop motor with minor mods (silvertop rods, port matching/smoothing etc) to go in there in place of the silvertop.

Bin the p/s and a/c while you have everything out, good way to shed some weight (and tone the arm muscles :D)


As much as I want it to be fast, I also want it to be comfortable :wink:
User avatar
AE92-5ONIC
Toyspeed Member
 
Posts: 134
Joined: Sun Apr 25, 2010 12:00 am
Location: Hamilton, NZ

Previous

Return to General Car Discussion

Who is online

Users browsing this forum: Google [Bot] and 14 guests