Hey
Just a note, the 0 minute setting will still have the engine running on for 10 seconds. This is due to the ignition delay built in to enable the car to start without the immobilisers closing again. The only way to totally stop the turbo timer function is to change the wiring to a normal set up.
Auto arm is as follows:
Hop in the car leaving the door open and have the boot and bonnet closed
Arm then disarm the alarm
Turn the ignition to ON
Press the boot pop button (left hand button on torch remotes) 4 times, it will beep for each press, if not start again.
Now turn the ignition off, the siren will beep a number of times, one of the beep sequences will be four times. This is the conformation that feature is on
Brad