How to unlock boot!

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

How to unlock boot!

Postby .:O4AGTZ:. » Tue Nov 16, 2010 12:07 pm

Well my partner seems to constantly break things on her car (ST170/ST171 corona). Now the boot will not open, with the latch or with the key. When you put the key in it doesnt turn and when you pull the lever near the drivers seat it just pulls and you dont get that feel when it pops.

For some reason the back seats dont come down, so I think I will actually have to take it out to have a look. Is it possible to easily open a boot from the inside? I suspect it is not an issue with the cable, but the lock itself.

Any advise appreciated!
.:O4AGTZ:.
Toyspeed Member
 
Posts: 754
Joined: Sun Jun 11, 2006 6:15 pm
Location: Wellington

Postby tsoob » Tue Nov 16, 2010 12:59 pm

take the seat out and see if you can get to the latch.
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby BZG Wagon » Tue Nov 16, 2010 1:10 pm

Agree - sounds like unbolting the seat is the best approach (presumably something is wrong with the latch?).

Shouldn't be too hard to get to.
User avatar
BZG Wagon
Toyspeed Member
 
Posts: 1573
Joined: Tue Oct 26, 2004 10:28 pm
Location: Waitakere City, Auckland.

Postby .:O4AGTZ:. » Tue Nov 16, 2010 1:41 pm

Yeah thats what I will be doing, im just lazy.

Definately something wrong with the latch though
.:O4AGTZ:.
Toyspeed Member
 
Posts: 754
Joined: Sun Jun 11, 2006 6:15 pm
Location: Wellington

Postby Bazda » Tue Nov 16, 2010 2:26 pm

Yep you will have to get the seat down. All you need is a flat head screw driver to flick the lever in the latch.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby .:O4AGTZ:. » Tue Nov 16, 2010 5:52 pm

Bazda wrote:Yep you will have to get the seat down. All you need is a flat head screw driver to flick the lever in the latch.


Ah sweet, never even looked at it so wasnt aware what I would be able to get to if anything. Will give it a go this weekend and see what happens
.:O4AGTZ:.
Toyspeed Member
 
Posts: 754
Joined: Sun Jun 11, 2006 6:15 pm
Location: Wellington

Postby deaf_rattle » Tue Nov 16, 2010 6:14 pm

sst#10064
Image
User avatar
deaf_rattle
Old Skool User!
 
Posts: 8039
Joined: Fri May 17, 2002 1:32 pm
Location: right where he belongs

Postby .:O4AGTZ:. » Tue Nov 16, 2010 6:57 pm

deaf_rattle wrote:sst#10064
Image


I would preferably like it to be able to close afterwards as well...
.:O4AGTZ:.
Toyspeed Member
 
Posts: 754
Joined: Sun Jun 11, 2006 6:15 pm
Location: Wellington

Postby B1NZ » Tue Nov 16, 2010 6:59 pm

have you tried putting a bit of pressure on it while either turning the key in the lock or getting someone to pull the lever?

Maybe give it a wiggle either way might work if it has pressure on it somehow?
Subaru GF8 Wagon
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
User avatar
B1NZ
Toyspeed Member
 
Posts: 6043
Joined: Sun Sep 01, 2002 7:20 pm
Location: Capital City

Postby no_8wire » Tue Nov 16, 2010 7:00 pm

.:O4AGTZ:. wrote:
deaf_rattle wrote:sst#10064
Image


I would preferably like it to be able to close afterwards as well...


Image

:lol:
User avatar
no_8wire
Toyspeed Member
 
Posts: 2268
Joined: Thu Dec 30, 2004 7:30 pm

Postby h8wrxs » Tue Nov 16, 2010 8:50 pm

hahaha i was going to suggest a crowbar when i first read this but i thought i shouldnt be a smartass lol
The four seasons in Australia consist of "$&#$% it's hot", "Can you believe how $&#$% hot it is?", "I won't be in today because it is too $&#$% hot" and "Yes, the dinner plate size spiders come inside to escape from the heat."
User avatar
h8wrxs
Toyspeed Member
 
Posts: 1026
Joined: Thu Apr 06, 2006 12:07 am
Location: travelling to candy mountain with my magical leoplurodon

Postby RomanV » Tue Nov 16, 2010 9:06 pm

B1NZ wrote:have you tried putting a bit of pressure on it

getting someone to pull

Maybe give it a wiggle

might work if it has pressure on it somehow?


Fixed for childishness.
User avatar
RomanV
Toyspeed Member
 
Posts: 4915
Joined: Wed Aug 13, 2003 12:17 am
Location: West Auckland

Postby darkwolf » Tue Nov 16, 2010 9:24 pm

Just check that the lever below the lock inside the boot hasn't been moved... I own a ST171 2.0 GL. Moving house, took off sharpish, microwave hit lock. Thought I'd stuffed it because it wouldn't undo. Took plastic cover off and found a lever, moved it, everything started working again.

Of course, you have to get in the boot first.
Brute force and ignorance always prevails.

Failure comes from too little brute force, or too little ignorance.
User avatar
darkwolf
Toyspeed Member
 
Posts: 543
Joined: Sun May 08, 2005 10:33 pm
Location: CHCH Nearly

Postby deaf_rattle » Wed Nov 17, 2010 2:46 pm

no_8wire wrote:
.:O4AGTZ:. wrote:
deaf_rattle wrote:sst#10064
Image


I would preferably like it to be able to close afterwards as well...


Image

:lol:


lol, make sure you have a hammer ready to hit the hookers with when they make a run for it though.
User avatar
deaf_rattle
Old Skool User!
 
Posts: 8039
Joined: Fri May 17, 2002 1:32 pm
Location: right where he belongs

Postby .:O4AGTZ:. » Wed Nov 17, 2010 5:39 pm

deaf_rattle wrote:
lol, make sure you have a hammer ready to hit the hookers with when they make a run for it though.


Its okay, they're tagged
.:O4AGTZ:.
Toyspeed Member
 
Posts: 754
Joined: Sun Jun 11, 2006 6:15 pm
Location: Wellington


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 16 guests