hub appears 2 be an mr2 item either aw or sw as early 1's r the same
unsure on the steering arm cant say ive seen 1 on anything comon
as 4 the ball joint looks like corolla as yems has stated from the likes of a
ae111 but lots of corolla use the same joint
Name this steering arm
Moderator: The Mod Squad
28 posts
• Page 2 of 2 • 1, 2
by soopachargen » Sun Apr 10, 2011 7:21 pm
I would put money on that being a caldina ball joint... the car is a caldina, if the factory balljoint fits you wouldn't bother changing it, and thats what it looks like on toyodiy
When in doubt, down and out.
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
-
soopachargen - Toyspeed Member
- Posts: 1598
- Joined: Thu Aug 05, 2004 1:54 pm
- Location: Silverdale
by CelicaGT8 » Sun Apr 10, 2011 8:59 pm
Yea the ball joint will be the easy part to find, so many toyota ball joints in that style, Hub is sw20 mr2, but what is the steering arm off, simular to an rx7 style one.
-
CelicaGT8 - Toyspeed Member
- Posts: 797
- Joined: Fri Jan 02, 2009 12:50 am
- Location: South Auckland
by soopachargen » Thu Apr 21, 2011 7:01 pm
the mounting points on some ce7* arms (which fit ae86 RCA's) that we have in the shed have 85mm between the two bolt centres
When in doubt, down and out.
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
-
soopachargen - Toyspeed Member
- Posts: 1598
- Joined: Thu Aug 05, 2004 1:54 pm
- Location: Silverdale
by CelicaGT8 » Fri Apr 22, 2011 9:37 pm
Thanks, i happen to have a gen3 sw20 here so i will check - In the dark, rain, cold. God bless winter
Last edited by CelicaGT8 on Fri Apr 22, 2011 10:02 pm, edited 1 time in total.
-
CelicaGT8 - Toyspeed Member
- Posts: 797
- Joined: Fri Jan 02, 2009 12:50 am
- Location: South Auckland
by CelicaGT8 » Fri Apr 22, 2011 10:02 pm
Yea the spacing measures the same. Could be worth a shot, CE7x, same as a ke70 but has a diesel engine?
Just need to find some and do a test fit. Anyone have some cheap ones lol
Just need to find some and do a test fit. Anyone have some cheap ones lol
-
CelicaGT8 - Toyspeed Member
- Posts: 797
- Joined: Fri Jan 02, 2009 12:50 am
- Location: South Auckland
by QikStarlie » Fri Apr 22, 2011 10:30 pm
will have to dig it out, but i have a single (cant remember what side) ae85/6 non power steer arm if thats any help. the ps arms are shorter
-
QikStarlie - Toyspeed Member
- Posts: 1110
- Joined: Tue Mar 25, 2003 10:30 pm
- Location: lost..
28 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 10 guests