Anyone have a hoist i can borrow for a day?

Moderator: The Mod Squad

Anyone have a hoist i can borrow for a day?

Postby LEAKER » Wed Jul 06, 2011 9:12 pm

I need to borrow a hoist for a day. I'm really struggling to diagnose a problem with my car at the moment and i need to be able to have the wheels rolling to to be able to see what the f*&ks going on. I have 4 axle stands but i'm a little concerned about being under a car with the wheels turning at 35-40kph while it sits on axle stands 8O

0275771340
The GT4 is to Celicas what the GTR is to skylines.
User avatar
LEAKER
Toyspeed Member
 
Posts: 370
Joined: Thu Dec 09, 2010 5:12 pm
Location: Lower Mutt

Re: Anyone have a hoist i can borrow for a day?

Postby CAMB01 » Fri Jul 08, 2011 9:07 pm

LEAKER wrote:I need to borrow a hoist for a day. I'm really struggling to diagnose a problem with my car at the moment and i need to be able to have the wheels rolling to to be able to see what the f*&ks going on. I have 4 axle stands but i'm a little concerned about being under a car with the wheels turning at 35-40kph while it sits on axle stands 8O

0275771340


No different to being on a hoist. Only the hoist can go higher
1993 Mitsubishi EVO 1 Racecar
1998 Mitsubishi Mirage ZR Asti Mivec (Daily Whip)
1989 AE91 FX-ZS (Previous)
1994 AE101 Levin 20v (previous)
1992 EE90 Corolla Sedan (previous)
1986 AE82 FX-GT Corolla (previous)
1989 AE92 FX-GTZ Supercharged (previous)
1992 EE90 Corolla Hatchback (previous)

Custom Works Automotive
http://www.HCCC.org.nz
User avatar
CAMB01
Toyspeed Member
 
Posts: 1440
Joined: Fri Jan 17, 2003 11:33 pm
Location: Wellyz

Re: Anyone have a hoist i can borrow for a day?

Postby headshotnz » Thu Jul 14, 2011 2:13 am

CAMB01 wrote:
LEAKER wrote:I need to borrow a hoist for a day. I'm really struggling to diagnose a problem with my car at the moment and i need to be able to have the wheels rolling to to be able to see what the f*&ks going on. I have 4 axle stands but i'm a little concerned about being under a car with the wheels turning at 35-40kph while it sits on axle stands 8O

0275771340


No different to being on a hoist. Only the hoist can go higher


Yeah when i was young and stupid (So err not to along ago :P) on my first car (ae100 5a-fe sprinter) i put it on axle stands and hitting speed limiter, chuck in 5th let it idle and it will be spinning the wheel round 40ish 50 from memory. :D also i good way to check what type of diff you have!
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville

Re: Anyone have a hoist i can borrow for a day?

Postby LEAKER » Thu Jul 14, 2011 8:44 am

CAMB01 wrote:
LEAKER wrote:I need to borrow a hoist for a day. I'm really struggling to diagnose a problem with my car at the moment and i need to be able to have the wheels rolling to to be able to see what the f*&ks going on. I have 4 axle stands but i'm a little concerned about being under a car with the wheels turning at 35-40kph while it sits on axle stands 8O

0275771340


No different to being on a hoist. Only the hoist can go higher


i just dont really like the idea of being under a car that is held up only by axle stands (that state: "Do not use to suspend both ends of a vehicle.")while revving the car in gear. If it drops it will go through the garage wall and crush me. I would feel much more comfortable with a hoist.
The GT4 is to Celicas what the GTR is to skylines.
User avatar
LEAKER
Toyspeed Member
 
Posts: 370
Joined: Thu Dec 09, 2010 5:12 pm
Location: Lower Mutt

Postby ~SlideWays~ » Mon Jul 18, 2011 11:03 am

For an extra bit of safety you could put some spare wheels under the sills/cross member/where ever?
User avatar
~SlideWays~
Toyspeed Member
 
Posts: 4974
Joined: Sat Nov 23, 2002 3:02 am
Location: Wellington

Postby XSVWGN » Mon Jul 18, 2011 11:57 am

whats the problem and how long would you need a hoist for? Im going to be doing some work on my wagon at Powerhaus in thorndon this weekend ... my brother is a mechanic there. I can always ask him if you could use a hoist


Matt
tt132 Corona wagon. 2jzgte project
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
User avatar
XSVWGN
Toyspeed Member
 
Posts: 1977
Joined: Tue Mar 30, 2004 8:45 pm
Location: Tawa, Wellington

Postby Mr Revhead » Mon Jul 18, 2011 12:51 pm

Remember that having it on a hoist is not replication road conditions.
So depending on what you are looking for it may not be all that helpful.
What is the issue?
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson


Return to Wellington / Lower North Island Region

Who is online

Users browsing this forum: No registered users and 6 guests