What would you pay for an Electric Impact Gun

General discussions on all non technical car related topics

Moderator: The Mod Squad

What would you pay for an Electric Impact Gun

Postby Bazda » Sat Sep 24, 2011 1:22 pm

Just seeing what interest there is in Electric Impact Guns.
This is not battery powered and has to be plugged into a power source - Mains or your car cigarette lighter

80W
380Nm Torque
8A
5000rpm no load
12v cigarette power adapter
4x sockets

What would people pay for something like this?
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Dell'Orto » Sat Sep 24, 2011 2:35 pm

1/2 or 3/8? I assume 1/2?
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Bazda » Sat Sep 24, 2011 2:49 pm

1/2"
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Sick Puppy » Sat Sep 24, 2011 4:36 pm

What brand, country of manufacture?
Project thread here

Discussion thread here
Sick Puppy
Toyspeed Member
 
Posts: 829
Joined: Fri Jun 17, 2005 10:29 pm
Location: Sydney

Postby stolic » Sat Sep 24, 2011 6:40 pm

Depends how well it actually works..
demo? 8)
ImageTA22-build - TA22-blah
I envy those with little interest in cars, for they have money and spare time.
User avatar
stolic
Toyspeed Member
 
Posts: 325
Joined: Mon Apr 13, 2009 1:07 pm
Location: Auckland

Postby Bazda » Sat Sep 24, 2011 10:58 pm

Its just a no Brand made in China.

Will get one in for my self to try. But would def be handy at the race track!
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Townace » Sun Sep 25, 2011 3:46 am

$60-80
would be interested in one if they perform nicely, lifes too short to spend all day swinging a ratchet
User avatar
Townace
Toyspeed Member
 
Posts: 108
Joined: Wed Jun 23, 2010 7:25 pm

Postby blindnz » Mon Sep 26, 2011 11:33 am

Townace wrote:$60-80
would be interested in one if they perform nicely, lifes too short to spend all day swinging a ratchet


I would have thought around $100-$120.

I paid that sort of price for a li-ion screwdriver. would expect an ok rattle gun to go for a similar price. completely depends on performance and quality though
User avatar
blindnz
Toyspeed Member
 
Posts: 970
Joined: Tue Aug 18, 2009 3:43 pm
Location: Auckland

Postby GTTpower » Mon Sep 26, 2011 12:43 pm

Used a friends one last night, was a snap-on. Was told it cost over $1000 8O
1999 SXE10 Altezza RS200Z
2004 Honda SCV100
Previous: 1993 EP85 Starlet, 1984 KP60 Starlet
Steam/Origin ID: nzEP85
User avatar
GTTpower
Toyspeed Member
 
Posts: 1160
Joined: Wed May 02, 2007 8:47 am
Location: Hamilton

Postby rollaholic » Mon Sep 26, 2011 2:32 pm

$300 worth of tool, $700.... something?
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby Bazda » Mon Sep 26, 2011 3:18 pm

Will get one from my supplier to test out and let you guys know how it performs!

But pricing would be around the $150 mark.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby cogent » Mon Sep 26, 2011 4:21 pm

we have a basic ozito one at home and it owns bones. very useful tools!
cogent
 

Postby Emperor » Mon Sep 26, 2011 6:59 pm

GTTpower wrote:Used a friends one last night, was a snap-on. Was told it cost over $1000 8O


Wasn't Degan by chance? Haha if so, that things a beast of a gun
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby GTTpower » Mon Sep 26, 2011 7:02 pm

Emperor wrote:
GTTpower wrote:Used a friends one last night, was a snap-on. Was told it cost over $1000 8O


Wasn't Degan by chance? Haha if so, that things a beast of a gun


Possibly, borrowed off a friend of a friend.
1999 SXE10 Altezza RS200Z
2004 Honda SCV100
Previous: 1993 EP85 Starlet, 1984 KP60 Starlet
Steam/Origin ID: nzEP85
User avatar
GTTpower
Toyspeed Member
 
Posts: 1160
Joined: Wed May 02, 2007 8:47 am
Location: Hamilton

Postby neo » Tue Sep 27, 2011 1:51 pm

I wouldnt pay for it... The hassle of having to fudge around with a power cable is just another PITA.

But a cordless one for $200 would be a goer :)
User avatar
neo
Toyspeed Member
 
Posts: 1965
Joined: Tue May 21, 2002 1:04 am
Location: Crazy Car Motorsport

Postby Distrb » Tue Sep 27, 2011 5:43 pm

neo wrote:I wouldnt pay for it... The hassle of having to fudge around with a power cable is just another PITA


+1

Got a cordless one and its the only way to go
Last edited by Distrb on Tue Sep 27, 2011 7:54 pm, edited 1 time in total.
www.hccc.org.nz 1986 Fx-Gt; 1999 Altezza
User avatar
Distrb
Regular Poster
 
Posts: 4756
Joined: Thu Jan 23, 2003 4:23 pm
Location: Wellington

Postby Bazda » Tue Sep 27, 2011 6:04 pm

Distrb wrote:
neo wrote:I wouldnt pay for it... The hassle of having to fudge around with a power cable is just another PITA


+1

Got a cordless one and its the only way to go


what happens if it goes flat at the track?
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby holden_fan2005 » Tue Sep 27, 2011 7:00 pm

Bazda wrote:
Distrb wrote:
neo wrote:I wouldnt pay for it... The hassle of having to fudge around with a power cable is just another PITA


+1

Got a corded one and its the only way to go


what happens if it goes flat at the track?


Plug the second battery in and kick yaself for not charging the first one :lol:
holden_fan2005
Toyspeed Member
 
Posts: 560
Joined: Thu Nov 29, 2007 12:33 pm
Location: Welly

Postby 2LTR Rona » Tue Sep 27, 2011 7:03 pm

Bazda wrote:
Distrb wrote:
neo wrote:I wouldnt pay for it... The hassle of having to fudge around with a power cable is just another PITA


+1

Got a corded one and its the only way to go


what happens if it goes flat at the track?


Pull out the strong bar & crank it manually
2002 Altezza, 1974 KE25

www.hccc.org.nz
User avatar
2LTR Rona
Toyspeed Member
 
Posts: 1903
Joined: Wed Aug 11, 2004 3:43 pm
Location: Wellington

Postby evil_si » Tue Sep 27, 2011 7:28 pm

power cord would be annoying
ive got the small dewalt lithium ion battery gun, will easily undo wheel nuts, i use it daily and get at least a week on a full charge,
User avatar
evil_si
Toyspeed Member
 
Posts: 2353
Joined: Sat Nov 01, 2003 6:19 pm
Location: TAURANGA, Pyes Pa

Next

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 26 guests