Toyspeed.org.nz Message Board

by **Mr. Mainstream** » Fri Feb 27, 2009 12:01 pm

Able to help out with any powdercoating/metal work again

by **Mr. Mainstream** » Sun Oct 30, 2011 1:49 pm

Bumpo

Website · by **Bling** » Wed Nov 02, 2011 11:34 pm

Just metal sheet or can you get off cuts of bigger stuff? Like 40mm box section. Or some flat bar roughly 40mm by 5mm etc. Mild steel.

Need some bits to spit roast the esky

by **Mr. Mainstream** » Fri Nov 04, 2011 12:38 pm

by **Mr. Mainstream** » Sat Nov 05, 2011 3:15 am

what a day :lol:

free again if anyone needs any sheetmetal or powder coat work in week

Show me the mud!!! · by **Elmo** » Wed Dec 14, 2011 6:48 pm

Just an enquiry if your still available for some small jobs. My mrs's is looking at some cake tins, they are either cheap and flimsy, or good but expensive.

Can you give an idea on price for say a 12 x 12 inch by 4 inch deep tin. No lid. Folded edges etc, but Im sure you would know what was required for food grade.

Cheers

by **Mr. Mainstream** » Fri Dec 16, 2011 8:16 am

Pm Sent

by **FST4RD** » Fri Dec 16, 2011 8:22 am

Can you strip and powdercoat?
I have a mountainbike frame that I want stripped back to bare metal and then powdercoated lime green or some nice bright green.

by **Mr. Mainstream** » Fri Dec 16, 2011 8:44 am

FST4RD wrote:Can you strip and powdercoat?
I have a mountainbike frame that I want stripped back to bare metal and then powdercoated lime green or some nice bright green.

I can powdercoat it no problems at all.
I have a very bright 'V' drink Green which looks ace.

Would be up to you to strip/sand it thou sorry.

Website · by **Bling** » Fri Dec 16, 2011 3:56 pm

So if someone brings you something that is freshly sandblasted. You can finish it from there?

Not keen on "V green" but will be sandblasting a pile of parts at some stage so powder coating could be a good option. Can you give an hypothetical price example for powder coating? Say a steel wheel or some suspension arms?

by **FST4RD** » Fri Dec 16, 2011 5:26 pm

Or a bike frame

Show me the mud!!! · by **Elmo** » Fri Dec 16, 2011 5:43 pm

No Pm my end :-(

by **Mr. Mainstream** » Sat Dec 17, 2011 12:35 am

BZG|Bling wrote:So if someone brings you something that is freshly sandblasted. You can finish it from there?
Can you give an hypothetical price example for powder coating? Say a steel wheel or some suspension arms?

Yip bring freshly sandblasted and i can treat and powdercoat no problems.

POA to be honest luke, done a double coat on 4x 13inch steelies recently for $140 to give idea. arms will be f all.

Website · by **Bling** » Sat Dec 17, 2011 12:48 am

All good Richie, will keep it in mind for next year when I actually need some stuff doing. Gives me a rough idea though which is what I was after

Show me the mud!!! · by **Elmo** » Mon Jan 02, 2012 7:25 pm

Hey Richie? Did you get my pm the week before xmas?

by **Mr. Mainstream** » Fri Jan 06, 2012 11:44 am

yes have now replied.

been on holiday

Show me the mud!!! · by **Elmo** » Sun Jan 15, 2012 5:54 pm

Mels absolutely stoked with the product. Her eyes lite up as soon as I showed her the first one, then almost fell off chair when I told her there were 3.

If you want to text me your account details mel will transfer the rest to you tonight.

By chance can you give a gst recipt? Im guessing not, which is ok.

Cheers

Look forward to getting more made very soon.

Ken

by **FST4RD** » Sun Jan 29, 2012 10:55 am

Just bought some mags, wanting to get them powdercoated before I fit them.
They're 17's, what sort of price would I be looking at?

by **Mr. Mainstream** » Sun Jan 29, 2012 11:33 am

Pm'd mate

Toyspeed.org.nz Message Board

Anyone want Sheetmetal Work Or Powdercoating

Who is online