There are a few different brands of light weight Chromoly Flywheels on trade me at the mo and they all look pretty similar at similar prices $400-$500.
They are advertised at 3.8 kg which is about half the standard 4age weight. I want to stick with the 200mm clutch setup which discounts using a blacktop flywheel.
Just wondering if people have found them good value for money??
Im building a 20v pretty much standard except for 11.5 compression and Link with trumpets.
Light weight Chromoly Steel Flywheels...peoples thoughts??
Moderator: The Mod Squad
8 posts
• Page 1 of 1
Light weight Chromoly Steel Flywheels...peoples thoughts??
by AE86fan » Tue Dec 27, 2011 6:11 pm
1984 NZ AE86
-
AE86fan - Toyspeed Member
- Posts: 171
- Joined: Wed Feb 04, 2004 4:55 pm
- Location: Wellington
by Celica RA45 » Wed Dec 28, 2011 12:43 am
go with the chrom moly as the fandanza are shit ;dont trust alloy at all if you wont to keep your legs,.. are known to let go and if you are up at 8000rpm and bang there goes the box and also the motor
steel is your freind and alloy is good for inlets
steel is your freind and alloy is good for inlets
- Celica RA45
- Toyspeed Member
- Posts: 308
- Joined: Wed Feb 05, 2003 9:55 pm
- Location: melbourne ,aust
by allencr » Wed Dec 28, 2011 5:30 am
search
I claim no knowledge of ebay the manufacturers or overseas availability.
http://www.ebay.com/itm/EXEDY-CLUTCH-KI ... 0532928667
I claim no knowledge of ebay the manufacturers or overseas availability.
http://www.ebay.com/itm/EXEDY-CLUTCH-KI ... 0532928667
- allencr
- Toyspeed Member
- Posts: 346
- Joined: Thu Dec 04, 2008 9:02 am
- Location: Talahassee, Florida USofA
by Flannelman » Wed Dec 28, 2011 11:13 am
The downsides to light flywheels are low speed driving becomes hard to keep smooth and it becomes easyer to stall.
Bonus? Engine becomes more responsive as less power is lost in the inertia of the flywheel.
The ligher the flywheel, the greater these effects become.
The 212mm blacktop clutch setup will fit on these flywheels too.
Bonus? Engine becomes more responsive as less power is lost in the inertia of the flywheel.
The ligher the flywheel, the greater these effects become.
The 212mm blacktop clutch setup will fit on these flywheels too.
- Flannelman
- formerly known as Affroman
- Posts: 461
- Joined: Mon Jul 19, 2004 9:43 pm
- Location: Old Plymouth
by 85AW20v » Wed Dec 28, 2011 10:22 pm
allencr wrote:search
I claim no knowledge of ebay the manufacturers or overseas availability.
http://www.ebay.com/itm/EXEDY-CLUTCH-KI ... 0532928667
Add on USD$215 for freight and there's not much point......
See ya
Simon
85 MR2 20v
Simon
85 MR2 20v
-
85AW20v - Toyspeed Member
- Posts: 1059
- Joined: Fri May 24, 2002 6:18 pm
- Location: Taupo, NZ
by Dell'Orto » Thu Dec 29, 2011 6:57 pm
Only over $400NZ, but that includes freight too...
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: Majestic-12 [Bot] and 16 guests