Intercooler mounting - whats your thoughts

General discussions on all non technical car related topics

Moderator: The Mod Squad

Intercooler mounting - whats your thoughts

Postby NOLAW » Sun Jan 22, 2012 4:28 pm

Currently mounting the I/C on my car and im in two minds of how to mount it, i can etheir have it mounted right up behind the grill or down low out the bottom.

To me i like the stealth look with it tucked away behind the grill, bad point about this is il have have to cut the back of the grill and under-grill peice out to make it fit (about 1 1/2"-2") which i dont like doing on old cars, also this method will limit my space to fit my oil cooler as i was looking at mounting this up behind the grill.

The other option is having it mounted below the bumper, this means i wont have to cut into anything except for the valence which i would have cut and then professionally panel beated to fit around the Intercooler to look reasonably factory, this still means it will be hanging a fair way out the bottom which is another thing im not too keen on, but it could work.

let me know what you guys think and what your point of view is on it

cheers
Morgz

Image
Image
NOLAW
Toyspeed Member
 
Posts: 623
Joined: Sun Jan 01, 2006 4:26 pm
Location: whakatane

Postby Bling » Sun Jan 22, 2012 4:48 pm

My point of view would be that if you can completely tuck it away from view, do that. IMO will always look better than a cooler hanging down below everything else.
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby iOnic » Sun Jan 22, 2012 4:50 pm

w2a or grille IMO
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby Mr Revhead » Sun Jan 22, 2012 5:36 pm

Yeah get it out of sight.
Oil cooler can be mounted easier elsewhere as it's smaller and not as critical to have the same kind of air flow to it.
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Snaps » Sun Jan 22, 2012 5:46 pm

Up high - low intercoolers look ricey :?

As Rev said - it's much easier to mount the oil cooler in a different place than to try and get a low intercooler looking good :wink:
Cheers,
Brandon

2000 ZZT231 Manual Toyota Celica
User avatar
Snaps
Toyspeed Member
 
Posts: 652
Joined: Wed Aug 27, 2008 7:24 pm
Location: Palmerston North

Postby Emperor » Sun Jan 22, 2012 7:26 pm

Get a small one and behind grill?
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby matt dunn » Sun Jan 22, 2012 7:39 pm

Emperor wrote:Get a small one and behind grill?


yeah, get a smaller IC for it.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby crispy'86 » Sun Jan 22, 2012 7:57 pm

Definitely behind the grille and reasonably small so it can fit in there nicely
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
User avatar
crispy'86
** Moderator **
 
Posts: 3548
Joined: Thu Jul 03, 2003 11:27 pm
Location: Chch

Postby rollaholic » Sun Jan 22, 2012 7:59 pm

yeah i cant stand the way the aussies love throwing massive intercoolers on old cars, hanging out the bottom like that.

to my mind a 'classic' should be kept as original looking as possible.
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby evil_si » Sun Jan 22, 2012 8:15 pm

Behind the grill man
User avatar
evil_si
Toyspeed Member
 
Posts: 2353
Joined: Sat Nov 01, 2003 6:19 pm
Location: TAURANGA, Pyes Pa

Postby Lloyd » Sun Jan 22, 2012 8:26 pm

Hide it

Image
User avatar
Lloyd
** Moderator **
 
Posts: 6195
Joined: Tue Oct 15, 2002 1:50 pm
Location: Dunedin

Postby NOLAW » Sun Jan 22, 2012 8:27 pm

i was running a smaller one on the last engine setup but decided to go to a larger one for better cooling and flow as the previous one had restricted air flow getting to it because it was tucked behind the valence, even if i had a smaller one up top behind the grill i would have to cut the back of the grill out because there is very little room behind there so if im going to cut the back of the grill out to make room for the i/c i may aswell stick with the larger one
NOLAW
Toyspeed Member
 
Posts: 623
Joined: Sun Jan 01, 2006 4:26 pm
Location: whakatane

Postby FST4RD » Sun Jan 22, 2012 10:13 pm

Has to be behind the grill.
Painting it black will make the intercooler more stealthy :D
1983 Mitsubishi Starion
1995 Subaru legacy GT SW

http://toyspeed.blakjak.net/profiles/pr ... hp?id=1542
User avatar
FST4RD
Toyspeed Member
 
Posts: 2380
Joined: Thu Apr 15, 2004 5:25 pm
Location: Christchurch

Postby solitaire » Sun Jan 22, 2012 10:36 pm

lloyds pic sells it - behind the grill
AE92, KZJ120, KDJ120
User avatar
solitaire
Toyspeed Member
 
Posts: 3371
Joined: Fri Apr 21, 2006 9:06 am
Location: Orewa, Auckland

Postby JustinSpiderholden » Mon Jan 23, 2012 9:42 am

Hidden
justinspiderholden.tumblr.com
JustinSpiderholden
Toyspeed Member
 
Posts: 978
Joined: Thu Jun 06, 2002 11:40 am

Postby tsoob » Mon Jan 23, 2012 10:24 am

second picture bro!
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby Dell'Orto » Mon Jan 23, 2012 10:29 am

Apart from looking meh, the intercooler hanging low in that first pic makes it a great judderbar scraper. Hide it /W2A
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby duddley » Mon Jan 23, 2012 11:01 am

Old cars look way tougher with it behind the grill
i don't club seals..... only sandwiches
duddley
Toyspeed Member
 
Posts: 1082
Joined: Fri Feb 06, 2009 10:32 am
Location: auckland

Postby ch4ng » Mon Jan 23, 2012 2:03 pm

Are you able to have it "up" but physically move the whole thing lower?

MS paint to the rescue!

Image
Chondah Civic
2T Navara
ex:
Charade Detomaso
MX5 - Stancemobile
MX5 turbo - El Tigre
87 Alto - The Tragic 3cyl powah
AE111 BZ-G Death Race 15.09

No Limits Onsite Paint Repairs. Cut and polishing, stone chip and scratch repairs. 021-177-8539 Mention Toyspeed.
User avatar
ch4ng
Toyspeed Member
 
Posts: 595
Joined: Sat Dec 27, 2008 7:28 pm
Location: Auckland

Postby FST4RD » Mon Jan 23, 2012 2:21 pm

:lol: Awesome MS Paint skills! Better then mine though :oops:
1983 Mitsubishi Starion
1995 Subaru legacy GT SW

http://toyspeed.blakjak.net/profiles/pr ... hp?id=1542
User avatar
FST4RD
Toyspeed Member
 
Posts: 2380
Joined: Thu Apr 15, 2004 5:25 pm
Location: Christchurch

Next

Return to General Car Discussion

Who is online

Users browsing this forum: Google [Bot] and 28 guests