my BZR just got louder? Problem found, need suggestions :)

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

my BZR just got louder? Problem found, need suggestions :)

Postby Tagged » Fri Feb 17, 2012 8:10 pm

Went down to magoos today and found out what was the problem.

There is a huge split where the pipping connects to the exhaust, what remains there barely holds the exhaust where it is and its really wobbly.

Was given a quote on replacing the pipping from the mid to rear section for around $160. The guy also welded a few points so the whole thing wouldn't come off while driving.

What I had in mind though is, if he can weld a few points back on, couldn't he just weld the whole thing back on?? Or is it actually better to replace the section.

THanks guys.




(below is the original post)

After a 3 month trip im finally back in NZ and driving again.
However I realised that my car sounds a lot louder than 3 months ago!
During the 3 months period a friend of mine was taking care of the car, what could have happened to cause this?? Im not sure whether its the induction noise or is it from the exhaust.
And my friend would have told me if any shit have happened while i was gone.
Oh he didn't go change the muffler or anything like that if you were wondering... :D
Last edited by Tagged on Fri Mar 02, 2012 3:50 pm, edited 5 times in total.
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby Dell'Orto » Fri Feb 17, 2012 8:22 pm

If the rear muffler is a cheapy, the packing may have melted out. Or you're just not used to it anymore.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Tagged » Fri Feb 17, 2012 8:25 pm

Dell'Orto wrote:Or you're just not used to it anymore.


thats what i first thought. but after a few minutes I am almost 100% sure if does not sound like this before.....it almost sounds like I've got a aftermarket muffler.....which I dont D:
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby DVSMOTORSPORT » Fri Feb 17, 2012 8:32 pm

Muffler taken a big whack and killed the internals?

air filter been cleaned/replaced and fitted incorectly?

Simple thing as an exhaust leak?
Hi Im Ben, Have a nice day :)
User avatar
DVSMOTORSPORT
Toyspeed Member
 
Posts: 328
Joined: Mon Nov 21, 2005 1:59 pm
Location: Hamilton

Re: my BZR just got louder???

Postby MrOizo » Fri Feb 17, 2012 10:36 pm

Tagged wrote:During the 3 months period a friend of mine was taking care of the car..

Tagged wrote:..what could have happened to cause this??


Maybe he told you a watered down version of looking after it? :lol:

Check the underside of the exhaust and see that it hasnt taken any big knocks? Your mate might have hit something and not being toooooo familiar with it didnt think anything was wrong? Did your mate notice a change in noise? One day it seemed louder/weird?
User avatar
MrOizo
Toyspeed Legend
 
Posts: 6658
Joined: Thu May 16, 2002 9:26 pm
Location: Onehunga, Auckland

Postby Tagged » Sat Feb 18, 2012 1:26 am

haha nah he actually scraped the front guard which he told me about and fixed it as well.

Yea gotta recheck with him to see if it changed over time or overnight.
its not sounding too bad imo, but really not used to this kinda noise level haha.

Should I be worried about anything in this kinda situation?? i mean could a "unidentified loud muffler" be a potential problem at all?
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby MrOizo » Sat Feb 18, 2012 8:05 am

Maybe try have the car idling and block up the tip with a shoe/towel and see if there is a leak or something like that.

Didnt change the air filter for you?
User avatar
MrOizo
Toyspeed Legend
 
Posts: 6658
Joined: Thu May 16, 2002 9:26 pm
Location: Onehunga, Auckland

Postby Kiwi-Corolla » Sat Feb 18, 2012 8:49 am

Check to see if your catalytic converter is still there. Maybe your mate hacked it off, fitted a resonator in it's place and sold it to a scrap metal dealer for a profit :lol:
Image
Kiwi-Corolla
Toyspeed Member
 
Posts: 1492
Joined: Fri Jan 14, 2011 3:41 pm
Location: Auckland

Postby gt4dude » Sat Feb 18, 2012 11:18 am

bzr is normally fairly loud for factory exhaust just with an air filter alone, probably silent to other road users anyways.

isnt the factory exhaust ID on those BZ-R's like 2.25" anyways ???
セリカGT-FOUR ST205 中期型 (Chuuki)
GT2860RS ・ JE 86.5φ PISTON ・ FX400 CLUTCH ・ APEX P-FC
200AWKW / 370NM
User avatar
gt4dude
Toyspeed Member
 
Posts: 723
Joined: Wed Apr 07, 2010 10:56 am
Location: Auckland

Postby Mr. Mainstream » Sat Feb 18, 2012 11:34 am

taken up smoking p?
Current:77 MK2 Ford Escort L 1.3L
75 MK2 Ford Escort L 2.1L

Had: 2X Early Subaru Leggys GT Wags, 1X Subaru RS, 1X 2004 Subaru B4, 2x BFMP Turbo Sedan Famil's, 2x BFMR Turbo Sedan Famil's, AE92 FX-GT, 97 Holden Calais 3.8L
Supercharged 12psi ,Escort, BZ-R
Various Others
RomanV wrote: Mr Mainstream: The king of the Pushrods?!
User avatar
Mr. Mainstream
Toyspeed Member
 
Posts: 864
Joined: Thu Jan 01, 2004 7:44 pm
Location: Skoping for my Mazda in ChCh

Postby iOnic » Sat Feb 18, 2012 5:20 pm

It was always that loud - you just haven't heard it in 3 months. I damn near crapped myself when I started my Corolla up after a couple of months getting turbo swapped. Sounded ridiculously loud when in actual fact it was much quieter than when I used it as a daily as it now had a turbo in the path of the (same) exhaust :lol:
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby Tagged » Fri Mar 02, 2012 3:03 pm

found out what the problem is today. need some suggestions b4 going on fixing it :D
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby Tagged » Fri Mar 02, 2012 3:06 pm

Kiwi-Corolla wrote:Check to see if your catalytic converter is still there. Maybe your mate hacked it off, fitted a resonator in it's place and sold it to a scrap metal dealer for a profit :lol:



just googled "CatBack" and "catalytic converter". If my understandings are right, "CatBack" is really just whatever comes after the "catalytic converter", and the "catalytic converter" is the device that reduce harmful emissions?
Last edited by Tagged on Fri Mar 02, 2012 3:58 pm, edited 1 time in total.
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby Tagged » Fri Mar 02, 2012 3:07 pm

MrOizo wrote:Maybe try have the car idling and block up the tip with a shoe/towel and see if there is a leak or something like that.

Didnt change the air filter for you?


huge leak haha :D
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby allencr » Fri Mar 02, 2012 3:18 pm

Flex pipe rusted up while you're away, became 'un-flexible' & broke soon after startup.
allencr
Toyspeed Member
 
Posts: 346
Joined: Thu Dec 04, 2008 9:02 am
Location: Talahassee, Florida USofA

Postby Tagged » Fri Mar 02, 2012 3:21 pm

allencr wrote:Flex pipe rusted up while you're away, became 'un-flexible' & broke soon after startup.


oh....yea i was wondering if its rusted or not as well. So what you are saying is that section of pipping will most likely need a replacement right?
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby 1I1 » Fri Mar 02, 2012 3:44 pm

I didn't think the "flexi" in these was really a problem? It's built into the 2-1 pipe. Right at the flange from the 4-2 (if that makes sense?)

Instead of a conventinal flexi these have a hinged one
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed ;))
User avatar
1I1
Toyspeed Sponsor
 
Posts: 3063
Joined: Mon Oct 01, 2007 6:55 pm
Location: Palmerston North

Postby Tagged » Fri Mar 02, 2012 3:51 pm

1I1 wrote:I didn't think the "flexi" in these was really a problem? It's built into the 2-1 pipe. Right at the flange from the 4-2 (if that makes sense?)

Instead of a conventinal flexi these have a hinged one


lol i am not smart (mechanical minded) enough to understand any of the above....... :oops:
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch

Postby rollaholic » Fri Mar 02, 2012 3:57 pm

personally i would just pay the $160 - im sure they would have said if welding it all up were an option.
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby Tagged » Fri Mar 02, 2012 4:01 pm

rollaholic wrote:personally i would just pay the $160 - im sure they would have said if welding it all up were an option.


thanks for the suggestion :)
User avatar
Tagged
Toyspeed Member
 
Posts: 343
Joined: Mon Oct 11, 2010 11:01 am
Location: Christchurch


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 22 guests