Epic Supra build

General discussions on all non technical car related topics

Moderator: The Mod Squad

Epic Supra build

Postby ee904age » Mon Oct 01, 2012 1:29 pm

Some of you may have seen this before, but here's a link anyway. I have only read the first couple of pages but talk about commitment!

Basically, Australian guy want's to rebuild JZA80, not happy with Australian workshops, so sends the car along with almost every TGP part imaginable to the USA to have a "brand new" supra built.

http://www.supraforums.com.au/forum/pro ... nd-up.html
90 SW20 Turbo - Project
90 SW20 N/A - Sold
User avatar
ee904age
Toyspeed Member
 
Posts: 1388
Joined: Tue Dec 16, 2003 6:27 pm
Location: Wanganui

Postby Lith » Mon Oct 01, 2012 1:44 pm

Crikey!!! Cheers for posting that, I think I might have an evening of reading sometime.

Talk about throwing everything he could think of at it - it would be interesting to see how the car drives, the twin sequential twin scroll quick spool valve turbo setup I would have thought was a pub talk thing if I hadn't seen a few of the pics etc in my skim over it, this dyno plot suggests full boost at just over 3000rpm (if you ignore the sequential valley of death) and 800whp on a low reading dyno though. Crazy:
Image
2007 Mazdaspeed Axela
User avatar
Lith
Toyspeed Member
 
Posts: 3137
Joined: Mon Dec 02, 2002 5:22 pm
Location: Kapiti

Postby l SIC l » Mon Oct 01, 2012 3:00 pm

With AUD$300,000+ thrown at a Supra, anything's possible :p
R35 GT-R 'Black Edition' 750HP
86' AE86 GT Apex
96' S2 RZ Supra
R34 GT-R V-Spec
User avatar
l SIC l
Toyspeed Member
 
Posts: 433
Joined: Mon Feb 01, 2010 12:27 am
Location: Auckland

Postby sergei » Mon Oct 01, 2012 3:37 pm

I find it funny how he states that Porsches are expensive and supras are cheap and then throws a Porsche and half worth of money at a supra.

Also the manifold is very odd, I wander why they joined each runner together in the beginning?
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby MAC_HATER » Mon Oct 01, 2012 3:41 pm

i would do that if i had the cash to blow

just to see the look on the Toyota dealer's face when i bring in a relic and simply point at them and go OI YOU and then point at the car - MAKE IT NEW AGAIN
Image
~SlideWays~: Cars + Males = Single, therefore: Poptarts?
User avatar
MAC_HATER
Toyspeed Member
 
Posts: 1071
Joined: Tue Oct 26, 2010 10:35 am
Location: Invercargill

Postby l SIC l » Mon Oct 01, 2012 3:47 pm

Making it new would be a fraction of that build cost. He could've bought around 6-7 of those <5,000 KM examples from Japan if he wanted to lol
R35 GT-R 'Black Edition' 750HP
86' AE86 GT Apex
96' S2 RZ Supra
R34 GT-R V-Spec
User avatar
l SIC l
Toyspeed Member
 
Posts: 433
Joined: Mon Feb 01, 2010 12:27 am
Location: Auckland

Postby dnalunchie » Mon Oct 01, 2012 5:18 pm

Best modified car build I have ever seen. Anyone else think so?
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby l SIC l » Mon Oct 01, 2012 5:43 pm

Best Jap car build ever, yeah. No debate, thanks for coming, help yourself to the finger food.
R35 GT-R 'Black Edition' 750HP
86' AE86 GT Apex
96' S2 RZ Supra
R34 GT-R V-Spec
User avatar
l SIC l
Toyspeed Member
 
Posts: 433
Joined: Mon Feb 01, 2010 12:27 am
Location: Auckland

Postby dnalunchie » Mon Oct 01, 2012 6:36 pm

I really love what he did with the rear seat delete. very impressive. Also love the way he didn't cover the whole damn interior with gauges.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby Alex B » Mon Oct 01, 2012 6:56 pm

Welp, if you can't buy a new JZA80 i guess you can always build one. I'm only up to page 4 and looking at the OEM parts hes brought i'd guess it's already cost him more than a new one.
User avatar
Alex B
Toyspeed Member
 
Posts: 6539
Joined: Thu Nov 25, 2004 1:39 am
Location: London

Postby dnalunchie » Mon Oct 01, 2012 7:17 pm

I just finished the whole thing. I'd say around 200-300k
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby 2jayzgte » Mon Oct 01, 2012 7:31 pm

That build thread is madness..

Where do you start $300 K I think it'll surpass that with ease.To me it looks like he has bought everything new every last part.

I'm guessing theres at least $100 K in the engine build alone.
2jayzgte
Toyspeed Member
 
Posts: 1997
Joined: Thu Sep 14, 2006 9:16 pm

Postby rollaholic » Mon Oct 01, 2012 7:49 pm

horrendous amounts of money wasted in that build IMO.

car looks amazing so far though - only about halfway through.
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby MR2SIK » Mon Oct 01, 2012 8:12 pm

Too many pages dedicated to every little bit of new interior trim.. got bored reading eventually.

Looks like it would be a mint machine though.
2011 Ford Mondeo tdci.

Hey, at least it sounds like a 3s.

1990 MR2 GT garage queen
User avatar
MR2SIK
Toyspeed Member
 
Posts: 2016
Joined: Tue Nov 25, 2003 9:30 pm
Location: Christchurch

Postby Mr Ree » Mon Oct 01, 2012 8:40 pm

Without clicking the link, this surely has to be Infernos build.

Committment beyond committment to take a build as far as he did. The amount of time needed just to work out the part numbers would have almost been a fulltime job.

It must feel so nice to pull the door closed against all those new door rubbers, and to have the interior smell like the day it rolled off the factory floor.

Lots of money spent, and you have to give it to the guy for doing it once and doing it right.
wak thud gush!
User avatar
Mr Ree
Toyspeed Member
 
Posts: 2758
Joined: Wed Nov 17, 2010 6:51 pm
Location: On the South coast where the tui's sing tututu.

Postby dnalunchie » Mon Oct 01, 2012 10:31 pm

yeah I really would love to see what it was like to hear the door thud like it did new from factory.

Also I cant see it costing much more than 300k. I mean maybe 350k including the 2 cars.

engine 100k.

other parts 100k

exterior 100k.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby pureadrenalin » Mon Oct 01, 2012 10:51 pm

This build just doesn't compute in my head.
Maybe thats because I don't have hundreds of thousands lying around to waste.
Don't get me wrong, I'm impressed, BUT WHY!
----------------------------------
Duct tape is like the force. It has a light side, a dark side, and it holds the world together
User avatar
pureadrenalin
Toyspeed Member
 
Posts: 585
Joined: Thu Mar 30, 2006 2:01 pm
Location: New Plymouth

Postby 2jayzgte » Mon Oct 01, 2012 11:16 pm

Man I would have gone for the Cosworth/Jun 3.2 litre stroker if I was to stroke a JZ with that guys budget.

I'll say this that guy is committed I'll give him that.
2jayzgte
Toyspeed Member
 
Posts: 1997
Joined: Thu Sep 14, 2006 9:16 pm

Postby snwtoy » Mon Oct 01, 2012 11:32 pm

Jayzus!!!! That was MADNESS!!

He seems to be the ultimate chequebook racer(?)... It doesn't once mention that he lifted a single nut or bolt, except maybe taking delivery of them.

In saying that, as above, the dedication to get the parts ordered, and the unholy amount of emailing and phone calling he must have done during the build defies belief.

I also can't fathom how he could afford this thing that would have cost as much as a house, while still studying?!?!?

One question, where does the 7th (centre) exhaust header go?
User avatar
snwtoy
Toyspeed Member
 
Posts: 5810
Joined: Mon Aug 30, 2004 7:54 pm
Location: Auckland

Postby dnalunchie » Tue Oct 02, 2012 1:28 am

he isnt still studying, as it states in the first post it says that he had just graduated when he initially decided to buy the supra.

The build looks to have taken about 4 years in total from first purchase to finish, if he was a lawyer or accountant or similar it is possible he could have paid for it himself slowly over the years. Maybe his family gave him the money. Either way I say good on him, it was his dream car and he gets to live it every day. Also a heck of a lot more imagination than buying a dime a dozen gt3 or similar.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Next

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 41 guests

cron