good place to get mandrel bent exhaust pipebends in auck

[escortman]

as the title reads after some 3in exhaust bends

Cheers

[edwagon]

STA parts aren't too bad

[Bazda]

Tube Bending East Tamaki

[20v_rollaboy]

+1 for Tube Bending, dealt with them a few times.

[CelicaGT8]

Tube Bending East Tamaki

They didnt seem to know what they were doing when i went there...

[strx7]

autobend's auckland distribution office?

[Bazda]

Tube Bending East Tamaki

They didnt seem to know what they were doing when i went there...

Maybe you didnt give them a clear explanation of what you need...

3" mild steel tube bends are pretty easy to get.
90 deg, 45deg, 180 deg or straight!

Or you can go through their bins.

[edwagon]

Tube Bending East Tamaki

They didnt seem to know what they were doing when i went there...

Maybe you didnt give them a clear explanation of what you need...

3" mild steel tube bends are pretty easy to get.
90 deg, 45deg, 180 deg or straight!

Or you can go through their bins.

Tube bending are awesometown
Not really set up for retail tho, which is why I didn't recommend them first - unless you know what you are doing then they're not really that user friendly

[Bazda]

They take cash.

They aren't going to design your exhaust. What's so hard about saying I want a 3" 90 deg bend in mild steel :S
Never had an issue with them over the last 5 years.

[escortman]

cheers Barry knew it was something like that couldnt remember the name, will try get in there to day, will also get in touch with you next week about the v band flange, as i got some but they seem to be of a slightly smaller size.

[85AW20v]

3" mild steel tube bends are pretty easy to get.
90 deg, 45deg, 180 deg or straight!

Hey Barry - how hard is to get the straight bends you're talking about....