Toyspeed.org.nz Message Board

by **themaleman** » Sat Nov 10, 2012 7:30 pm

dose anybody know how to de-loom a bigport 4age loom? or where to get it done?

i know there used to be a guy on trademe that did it but i coudnt see him there anymore.

i need to deloom 2 looms for our sj410's that will getting 4age transplants

cheers
Liam

by **KinLoud** » Sun Nov 11, 2012 9:51 am

Talk to Nic Trls250s - he has stripped out looms for quite a few guys.
profile.php?mode=viewprofile&u=6434

by **Stu-** » Sun Nov 11, 2012 8:17 pm

Have you got the engine loom and just need it setep?
Can do that for you - simple job

by **themaleman** » Sun Nov 11, 2012 8:58 pm

1 of the looms came with the vehicle and is pretty stripped, the other is a complete loom, now the complete loom was from an auto and so is the ecu, can this be modified to suit a manual setup? even if we just get the complete loom done by someone we could copy it ourselves for the other.

thanks for the reply's!

by **sergei** » Sun Nov 11, 2012 10:09 pm

themaleman wrote:1 of the looms came with the vehicle and is pretty stripped, the other is a complete loom, now the complete loom was from an auto and so is the ecu, can this be modified to suit a manual setup? even if we just get the complete loom done by someone we could copy it ourselves for the other.

thanks for the reply's!

Auto loom can be reppined (if auto is not used) into manual, as long as you have plugs and patience.

by **Stu-** » Sun Nov 11, 2012 10:22 pm

Yeah thats easy too

by **gepsk8** » Tue Nov 13, 2012 1:06 pm

pm grotty he done heaps

Toyspeed.org.nz Message Board

de-looming

de-looming

Who is online