1NZFE engine noise

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

1NZFE engine noise

Postby RS13 » Tue Apr 02, 2013 2:48 pm

Having done around 2000km in the RunX now, I've noticed that the engine is quite noisy under moderate/heavy acceleration, almost sounds like badly adjusted tappets, dry bearing or chain noise.. it has only done 50kms however so I wouldn't imagine that something would have failed this early?

I assume there are other 1NZFE owners here, are they quite a noisy engine? Could it possibly be too thin engine oil perhaps?

Cheers.
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Re: 1NZFE engine noise

Postby sergei » Tue Apr 02, 2013 3:32 pm

RS13 wrote:Having done around 2000km in the RunX now, I've noticed that the engine is quite noisy under moderate/heavy acceleration, almost sounds like badly adjusted tappets, dry bearing or chain noise.. it has only done 50kms however so I wouldn't imagine that something would have failed this early?

I assume there are other 1NZFE owners here, are they quite a noisy engine? Could it possibly be too thin engine oil perhaps?

Cheers.


Mine does sound like piston rattle when cold and under load (similar to bottom end noise but more frequent, quieter and more tinny). It goes away once hot.
It is also generally noisy (chain and cam rattle), but I think it is normal.
It does not help that the inlet manifold is plastic and you hear a lot of valve/induction/hissing noise through that as well.

It always been like that since I had it (got it at 60k, now 100k), it is clean inside (so no sludge), I run 0W40 (I tried 10W40, and 5W30, no difference to noise).

BTW, there is no such thing as too thin oil, especially on cold. Even 0W is way too think at 40'C.

Eventually I might get myself around replacing chain tensioner as preventative/maintenance thing ( I am waiting for gaskets/seals leaking)....
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby Dell'Orto » Tue Apr 02, 2013 5:34 pm

They are quite noisy, I know our bB was quite rowdy but I think as Sergei mentioned, the plastic manifolds make them noisier.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby RS13 » Wed Apr 03, 2013 12:46 am

Thanks guys, I took a couple of workmates for a fang tonight and they didn't think it was too bad and seemed normal.. I also spoke to an ex-Toyota mechanic, he said that it may be a characteristic of that engine which you've pointed out!

Cheers. :)
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Postby QikStarlie » Wed Apr 03, 2013 4:31 pm

have driven one from 0 -140,000k as a company car, pretty much same deal as what everyone said above
User avatar
QikStarlie
Toyspeed Member
 
Posts: 1110
Joined: Tue Mar 25, 2003 10:30 pm
Location: lost..


Return to Tech Questions

Who is online

Users browsing this forum: Majestic-12 [Bot] and 10 guests

cron