Semi Slicks - Recommendations?

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Postby xsspeed » Fri Mar 22, 2013 6:55 pm

I just about daily the corolla with them on. they are good in the wet. have more tread than most semi slicks
xsspeed
Toyspeed Member
 
Posts: 3946
Joined: Tue Aug 21, 2007 5:56 pm
Location: Auckland

Postby DRFTIN » Sun Mar 31, 2013 10:37 pm

but less tread than a regular road tyre
i used mine daily for a while but after 2 track days and a few weeks driving i used half the tread already
User avatar
DRFTIN
Toyspeed Member
 
Posts: 1106
Joined: Tue Nov 19, 2002 6:39 pm
Location: Chch

Postby Prymal » Thu Apr 25, 2013 3:11 am

Im opretty biased when it comes to goodyears .. I had gsd2's on my first group A and they were truely epic , then , when i got my St205 group A , first thing i did was put on a set of the GSD3's - but the chinese manufactured ones . They were absolutely horrible tyres ..

Im now running a bridgestone re101 as a street tyre and sconsidering the re888 when i get back into track stuff ..

Are the GSD3's any better than what they were 4 years ago ? have they revised anything ?
St205 NZ New Group A WRC Gt4- Accept no Imitations !
Prymal
Toyspeed Member
 
Posts: 726
Joined: Thu Jul 13, 2006 11:17 pm
Location: Auckland

Postby 1I1 » Thu Apr 25, 2013 9:43 am

The RE002's are better again from the 001's.

re: Nittos, ran them fo the first time the other week. On the street they were fine. On the track they were grouse. From cold plenty of grip. On the edge of grip they were predictable - even when throwing it into a corner and making the the car to slide on corner entry in FWD and they didn't just let go completely.
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed ;))
User avatar
1I1
Toyspeed Sponsor
 
Posts: 3063
Joined: Mon Oct 01, 2007 6:55 pm
Location: Palmerston North

Postby DRFTIN » Fri Apr 26, 2013 9:28 am

so nitto quite a bit better than the achilles?
i'll be going that way when my 123's wear out probably
User avatar
DRFTIN
Toyspeed Member
 
Posts: 1106
Joined: Tue Nov 19, 2002 6:39 pm
Location: Chch

Postby loudstealthGT-Four » Fri Apr 26, 2013 11:38 am

Apparently with the Nittos, the more used they get the more grip you have, as i was trying to by some used ones from the Super Six guys, but they wouldn't sell them for that reason.
User avatar
loudstealthGT-Four
Toyspeed Member
 
Posts: 986
Joined: Mon May 18, 2009 12:34 am
Location: Invercargill

Postby dnalunchie » Fri Apr 26, 2013 1:19 pm

1I1 wrote:The RE002's are better again from the 001's.

re: Nittos, ran them fo the first time the other week. On the street they were fine. On the track they were grouse. From cold plenty of grip. On the edge of grip they were predictable - even when throwing it into a corner and making the the car to slide on corner entry in FWD and they didn't just let go completely.


The ones to get are the eagle asymetric 2's

http://asymmetric2.goodyear-micro.co.nz/index.html

They were just reviewed quite well in the latest MOTOR magazine issue. Top tire was a pirelli and the RE002 also did well as did the Toyo T1 sport

I think $ for $ RE002's are probably one of the best performance tires from a value perspective.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby Luke - BZG » Fri Apr 26, 2013 3:47 pm

Prymal wrote:Im opretty biased when it comes to goodyears .. I had gsd2's on my first group A and they were truely epic , then , when i got my St205 group A , first thing i did was put on a set of the GSD3's - but the chinese manufactured ones . They were absolutely horrible tyres ..

Im now running a bridgestone re101 as a street tyre and sconsidering the re888 when i get back into track stuff ..

Are the GSD3's any better than what they were 4 years ago ? have they revised anything ?


I've read a lot of people compaining about the GSD3's manufactured in China. Especially when they replace a german made one for an identical spec tyre made in China.

I think there are four countries they are produced in, I'm running a set of GSD3 Asymetrics made in Germany and they are awesome!
User avatar
Luke - BZG
Toyspeed Member
 
Posts: 212
Joined: Tue Sep 14, 2004 11:36 pm
Location: Wellington

Postby THA SHZ » Sat Apr 27, 2013 12:40 pm

DRFTIN wrote:so nitto quite a bit better than the achilles?
i'll be going that way when my 123's wear out probably

anything is better than the achilles , they are made for a cheap entry motorsport tyre , mainly aimed at the drifting market , not a good tyre at all if you have ridden on a quality semi slick before like the bridgestone or dunlop :)
Im the Daddy of the Mack Daddys ! :-)

http://toyspeed.blakjak.net/profiles/photos/861.jpg
User avatar
THA SHZ
Toyspeed Member
 
Posts: 2015
Joined: Wed May 12, 2004 5:48 pm
Location: Westside

Postby tsoob » Tue Apr 30, 2013 11:57 am

I rate the NT01, put them on stevo and had a blast out at hampton downs...

We would happily do a club discount on these for any toyspeeders.

Nick
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Previous

Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 7 guests