What did you do to your car today?
Moderator: The Mod Squad
-
ALES_AE111
- Toyspeed Member
- Posts: 93
- Joined: Wed Jul 22, 2009 12:51 pm
- Location: North Shore, Auckland
- dnalunchie
- Toyspeed Member
- Posts: 3393
- Joined: Tue Nov 09, 2004 11:07 pm
- Location: Christchurch
- Dell'Orto
- ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 4:07 am
- Location: Straight out the ghetto, Lower Hutt
Best. Mod. Ever
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
Washed it this morning.
And yesterday I played real life GranTurismo in someone else's Maserati. It sounded awesome and went like stink.
http://youtu.be/KNyKPe5aDMM
The beep is slightly north of 100kmh
And yesterday I played real life GranTurismo in someone else's Maserati. It sounded awesome and went like stink.
http://youtu.be/KNyKPe5aDMM
The beep is slightly north of 100kmh
-
Kiwi-Corolla
- Toyspeed Member
- Posts: 1492
- Joined: Fri Jan 14, 2011 2:41 pm
- Location: Auckland
- Mr Ree
- Toyspeed Member
- Posts: 2758
- Joined: Wed Nov 17, 2010 5:51 pm
- Location: On the South coast where the tui's sing tututu.
Installed intercooler, cut some intercooler piping.
Tried to mount 2JZGTE iacv to my FFIM, but no dice as the valve is too big for the hole on the mani
I might need to find something smaller, but still with Toyota plug.
Drilled out throttle cable linkage hole so the new cable end fits.
Took one of each of the old bolts for my cam and coil covers, so I can get some new allen key head replcements from coastal fasteners so they suit the new cam cover etc.
Tried to mount 2JZGTE iacv to my FFIM, but no dice as the valve is too big for the hole on the mani
Drilled out throttle cable linkage hole so the new cable end fits.
Took one of each of the old bolts for my cam and coil covers, so I can get some new allen key head replcements from coastal fasteners so they suit the new cam cover etc.
wak thud gush!
-
Kiwi-Corolla
- Toyspeed Member
- Posts: 1492
- Joined: Fri Jan 14, 2011 2:41 pm
- Location: Auckland
Popped into work this morning to take delivery of my job for next week
Fixed the daytime running lights and swapped the high beam from halogen to HID to match the low beam.
Then washed and installed carbon MPS badge on the rear + conditioned the seats.
Done 250kms to the first half of my first tank of E85 so pretty happy with that. If I can get 400 to a tank I'll be stoked. Doesn't randomly stall now either so I'm glad I took it in for a tune. Kinda wanna debadge the rear
Fixed the daytime running lights and swapped the high beam from halogen to HID to match the low beam.
Then washed and installed carbon MPS badge on the rear + conditioned the seats.
Done 250kms to the first half of my first tank of E85 so pretty happy with that. If I can get 400 to a tank I'll be stoked. Doesn't randomly stall now either so I'm glad I took it in for a tune. Kinda wanna debadge the rear
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander



