Aluminium Piping - Various angle bends exist?

[MrOizo]

I am finishing up the intake on my car and have a 4" into turbo from air Filter.
There's a 45deg pipe on the turbo intake and this seems not enough angle - A 90deg would be far too much.

Do other angles out there exist? I am guessing a 60deg would go nicely.

Searching on TM doesnt really show much apart from the common straight, 45, 90 etc.

Cheers.

[Stott69]

Ullrich aliuminum?
also try the DSR web site

[Mr Ree]

I bought some piping from Ullrich, but cant recall if they had anything apart from the typical bends.

I need to go out there and buy some piping in the next couple of weeks so will post back here just incase you still need some.

[Sideros]

You can get it bent to suit what ever you like. Go see an engineering firm or I can get a quote down here for you if you want. Flick me a text. Chur!

[phoenix]

Cut a section out of a 90 and reweld?

[Stu-]

Tube Bending Ltd! Cryers rd, East Tamaki

[MrOizo]

Thanks guys. Was wondering if there was a off the shelf option.
A tighter/smaller radius curbe would be ideal too. Will see what some one can do.

Tristan, I'll be in touch!

Chuuuuurs!