
What did you do to your car today?
Moderator: The Mod Squad
Grrrrrrr! wrote:Took it for a drive in its nice new clean and shiny state and proved that clean cars pull the young birds...![]()
I see what you did there........
Subaru GF8 Wagon
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
Kiwi-Corolla wrote:Sorry to see that. Unfortunately you're not the only MX-5 to be in accident today. My brother's '98 MX-5 was got written off on the motorway a couple of hours ago
Gutted.
(Are his wheels for sale? lol)
iOnic wrote:Gutted. Sounds like both MX5's just couldn't stop in time.
Yeah I did lock up slightly (no ABS is more fun on the track but definitely has it's benefits in split second panic braking) but I don't think it would have made much difference- since it was on a round a bout, I was already at an angle to her and she pulled out at the last minute....if I had turned away from her, I would have just hit her more square, if I turned with her I would have hit less square but in a worse spot (i.e. more panel damage for her car and my car).
I didn't have any time/space tp do much apart from try and minimise the impact.
Lightweight baby
1991 MX5 Supercharged
1991 MX5 Supercharged
-
LatitudeNZ
- Toyspeed Member
- Posts: 58
- Joined: Mon Aug 15, 2011 8:07 pm
-
Kiwi-Corolla
- Toyspeed Member
- Posts: 1492
- Joined: Fri Jan 14, 2011 2:41 pm
- Location: Auckland
-
Boosted_162
- Toyspeed Member
- Posts: 3624
- Joined: Sun Sep 04, 2005 12:02 am
- Location: Kaukapakapa
- Contact:
- Mr Ree
- Toyspeed Member
- Posts: 2758
- Joined: Wed Nov 17, 2010 5:51 pm
- Location: On the South coast where the tui's sing tututu.
Went and bought 20 metres of wire, a bag of conduit, and some solder, so I can make up my new ignition loom to run between the coils and ignitor.
Also, I went to Coastal Fasteners and got some new black allen key ended bolts to replace all of the old oxidised bolts for my cam covers, and coil covers etc.
Also, I went to Coastal Fasteners and got some new black allen key ended bolts to replace all of the old oxidised bolts for my cam covers, and coil covers etc.
wak thud gush!
Boosted_162 wrote:Replaced air filter
Snap!
Subaru GF8 Wagon
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
- Dell'Orto
- ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 4:07 am
- Location: Straight out the ghetto, Lower Hutt
Finally removed FD motor, what a c**t. If it blows again I'm gonna scrap in the car 
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
Dell'Orto wrote:Finally removed FD motor, what a c**t. If it blows again I'm gonna Lexus V8 the car
This is a better plan
EP82 Starlet GT club race car;
best time around Manfield to date : 1:19:91
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
best time around Manfield to date : 1:19:91
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
-
steroidcontaskie
- Toyspeed Member
- Posts: 349
- Joined: Wed Jun 29, 2011 2:42 pm
- Location: Auckland
Re: What did you do to your car today?
Took the car for a drive, rebuilt auto has a much harder shift, but nothing I can't live with.
Updated ECUs firware......fail......Fuel and igintion map gone...... Had to rebuild a fuel map from scratch so I could drive the car back into the garge.
Now, time to fix those annoying oil leaks.
Updated ECUs firware......fail......Fuel and igintion map gone...... Had to rebuild a fuel map from scratch so I could drive the car back into the garge.
Now, time to fix those annoying oil leaks.
Science never sleeps...
Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
- Dell'Orto
- ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 4:07 am
- Location: Straight out the ghetto, Lower Hutt
Re:
DexGT wrote:Dell'Orto wrote:Finally removed FD motor, what a c**t. If it blows again I'm gonna Lexus V8 the car
This is a better plan
If I were to put a V8 in it, I'd use a proper one
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
Re: What did you do to your car today?
Chip in front guard and dent in the rear have been fixed now & I put in the front grille too (Cheers, Rick!)




R35 GT-R 'Black Edition' 750HP
86' AE86 GT Apex
96' S2 RZ Supra
R34 GT-R V-Spec
86' AE86 GT Apex
96' S2 RZ Supra
R34 GT-R V-Spec



