ST215 coil-on-plugs pinout

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

ST215 coil-on-plugs pinout

Postby Vertigo » Sat Nov 29, 2014 12:42 pm

Hey guys, Im after the pinout for the 90919-02227 coil packs, as used in the ST215. Round top with four pins.
TVIS just kicked in, yo!
AW11 200kw 4AGTE build Discuss
Image
Vertigo
Toyspeed Member
 
Posts: 1172
Joined: Mon Aug 29, 2005 12:03 pm
Location: Auckland

Re: ST215 coil-on-plugs pinout

Postby Grrrrrrr! » Sat Nov 29, 2014 7:59 pm

Can't find the pinout, but I am pretty sure it was not the same as the other Toyota 4pin COPs. If you do find it can you post a link here, i'll be needing it soonish.

If anyone with a caldina has the intercooler off a few photos of the plugs would help, 3 wires should be the same colour, with the trigger wire being a different colour for each cylinder.
Reality: A nasty hallucination that is caused by excess blood in the alcohol stream.
Grrrrrrr!
Toyspeed Member
 
Posts: 2566
Joined: Tue Jun 17, 2003 7:21 pm
Location: Souf Orkland

Re: ST215 coil-on-plugs pinout

Postby Grrrrrrr! » Sat Nov 29, 2014 9:53 pm

Okay, the beams redtop uses the same style COP, outside pins are power, centre 2 are signal.

so with the connector on the COP pointing towards you and the body pointing down

GND(to head) IGT(ECU) IGF/ION(Not used) +12V
Reality: A nasty hallucination that is caused by excess blood in the alcohol stream.
Grrrrrrr!
Toyspeed Member
 
Posts: 2566
Joined: Tue Jun 17, 2003 7:21 pm
Location: Souf Orkland

Re: ST215 coil-on-plugs pinout

Postby Vertigo » Sun Nov 30, 2014 12:23 am

Excellent thank you, confirmed that works fine.
TVIS just kicked in, yo!
AW11 200kw 4AGTE build Discuss
Image
Vertigo
Toyspeed Member
 
Posts: 1172
Joined: Mon Aug 29, 2005 12:03 pm
Location: Auckland


Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 10 guests

cron