Toyspeed.org.nz Message Board

by **rollaholic** » Wed Sep 21, 2016 9:28 pm

im probably about the same Al.

company car

OMG so shiny! · by **Dell'Orto** » Wed Sep 21, 2016 9:54 pm

I struggle to remember a time when I only owned one car :lol:

by **rollaholic** » Fri Sep 23, 2016 7:37 am

yeah, before my twins were born i had two bikes and three cars.

has been a downhill slide ever since, i have been hot and cold about getting something to tinker with but not sure where i would find the time.

we shall see!

by **Boosted_162** » Sat Sep 24, 2016 7:16 pm

Cleaned the Altezza for the first time since buying it :lol:

Tried on an RP01....not sure what it would look like with higher profile tyres, this is a (flat) 225/50/15 which is too short.

by **Sick Puppy** » Wed Sep 28, 2016 12:41 am

Kiwi-Corolla wrote:You need this one: http://www.ebay.com.au/itm/Toyota-Corol ... Sw--1WrqKc

I find the Gregory's manuals are often better than Haynes anyway.

Which Haynes one did you get by the way? Their Corolla one does cover the 1ZZ but maybe you bought one for the wrong market: http://www.ebay.com.au/itm/NEW-HAYNES-R ... w8lCCHo3jw

edit: guessing you bought this one, which is for the UK market: http://www.ebay.com.au/itm/Haynes-Owner ... SwAYtWMwL7

Yup, that is the one - has to be my mistake, could have sworn that the one I took the ISBN from to compare prices was the Aussie one. meh, returned now, will claim on Paypal insurance.

Thanks heaps for the heads up and recommendation!

by **Kiwi-Corolla** » Sat Oct 08, 2016 9:51 pm

Made the most of the good weather, while it lasts.....

OMG so shiny! · by **Dell'Orto** » Sun Oct 09, 2016 10:29 pm

Fitted what I assumed to be 20v spec springs and new shocks to the Corolla, dropped it a bunch more than I was expecting! Doesn't scrape on my driveway at least :lol:

but it's pretty bouncy now...

Website · by Al » Mon Oct 10, 2016 9:40 am

Restored these two.

by **GDII** » Mon Oct 10, 2016 2:53 pm

What did you do to restore them? What was wrong with them?

Website · by Al » Mon Oct 10, 2016 4:28 pm

Used this leather repair kit from the UK. Leather repair company. They have a YouTube video on how to do it. One kit did both wheels and I could probably do another. The black leather colour had worn away on both wheels showing this yellow mess all over the wheel. The NZGT wheel (the one that just says Toyota) had this big superglue stain on the horn pad that I couldn't remove no matter what I used. Even soaking it with isopropyl alcohol did nothing. So redyed over that .

FXGT wheel is for sale. Rare so I want good coin for it.

by **steroidcontaskie** » Mon Oct 10, 2016 11:59 pm

Got replacement engine mounts and diff bushes for the soarer. Old engine mounts fell apart when I took the engine out.

https://flic.kr/p/M73yMM

[url]https://flic.kr/p/M73yMM][img]https://c8.staticflickr.com[/url]

http://www.vibra-technics.co.uk/toyota/soarer_mk2_86_91/635/TOY120M/engine_mount_gz20mz20_mz21_88_93

by **GDII** » Tue Oct 11, 2016 7:51 am

They look great. Nice work.

OMG so shiny! · by **Dell'Orto** » Mon Oct 17, 2016 12:24 pm

Wheels arrived for the Corolla, though not the Tom's ones sadly. Fitted up some RE003's, and got an alignment. Need to figure out how to get more front camber/caster without going coilovers though, even with ccamber bolts I couldn't get much over 1.2 degrees negative.

by **85AW20v** » Mon Oct 17, 2016 6:55 pm

Slot the bottom holes where the hub bolts onto the strut, towards the outside. Or camber plates from Barry.

OMG so shiny! · by **Dell'Orto** » Mon Oct 17, 2016 10:12 pm

Sweet, will give that a try on my return. Couldn't see any camber plates on his website, K-mac do a good option which gives camber and caster adjustment, and are rubber so should be nicer for a road option. Not cheap though!

by **85AW20v** » Tue Oct 18, 2016 6:07 pm

The camber plates for the AW were on Trademe.

by **steroidcontaskie** » Mon Oct 24, 2016 9:14 pm

Painted my transmission black... should be good for another 20hp. Now...what else can i paint

Website · by **Bling** » Sun Oct 30, 2016 4:16 pm

Decided to try and get a WOF today. So that meant tracing a wiring fault with my brake circuit. Took 2-3 hours to work out which wire it was, pull all the panels off to get to it, and feed a new wire through and retest. Got the car all back together sometime around 10PM last night.

Turned up at WOF station this morning to a long queue of people waiting. So flagged that idea, will take it down during the week.

Have been putting that fix off for over a year now, with car being stuck in storage, motivation has been low. Had a visit from
Dell'Orto booked in for today though, so thought i'd better pull finger and get onto it!

by **GDII** » Sat Nov 05, 2016 9:52 pm

Put a new loom tube on the engine bay temperature sensor wires.

Before

After

Then took some more photos.

by **Mr Ree** » Sun Nov 06, 2016 10:56 am

Loving the last shot

Toyspeed.org.nz Message Board

What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Re: What did you do to your car today?

Who is online