AW11 Engine drop and swap

[flying_wedge]

Hey.

I am planning a 4age drop and swap sometime between the 1st of July to the 9th, and my mates workshop I was going to use now cannot do it due to council regulations.

So, does anybody have the experience with AW11's and doing engine drops, and/or have a workshop or garage or backyard with an engine crane and tools that they could allow use of? Or does anybody know of any garages with "good" pricing ( ) for engine swaps that have worked on AW's before?

Payment can be discussed, and/or free booze of your choice on the day . . .

Also, if anybody wants to lend a hand at all on the day, that would be appreciated. Free booze for you too

Any help at all appreciated, as my current crankshaft is not far from spitting the dummy . . .

PM or reply

Cheers
-Mark

[Scotty]

here's an idea

[Monsterbishi]

You don't need an engine crane, just need a few high lifting car jacks, you lower the engine & gearbox down together, and jack the car up and off it.

Make sure you have the front wheels with a paver or two under them, or the nose will eat the dirt as the rear rises.

[JT]

here's an idea

I didn't realise aw11's came with 4 and 5 stud option

[Scotty]

here's an idea

I didn't realise aw11's came with 4 and 5 stud option

its left hand drive to

[flying_wedge]

You don't need an engine crane, just need a few high lifting car jacks, you lower the engine & gearbox down together, and jack the car up and off it.

Make sure you have the front wheels with a paver or two under them, or the nose will eat the dirt as the rear rises.

Cheers for that

[Mr Revhead]

Make sure you have the front wheels with a paver or two under them, or the nose will eat the dirt as the rear rises.

is that why my front lip is bent?