Hey i am putting 6x 20v throttle bodies on my N/A 2JZ-GE and am trying to figure out what ecu would be the best choice, I contacted link and they suggested the new Linkplus G2 as they think because of the itb's i will need the 4D mapping of the G2 to get the best from the engine (would prefer a cheaper option as alot of the G2 features are not going to be needed), what are other people running on the 4AGE's with itb? Any help would be appreciated.
Iain
What ecu to run 2JZ-GE with individual throttle bodies
Moderator: The Mod Squad
i have a fairly basic link setup on an ITB 4age turbo engine. (like 4 years old)
was difficult to tune smoothly but just requires a bit more time to get it right. after a couple of different tunes for different fuel systems its about as good as itll get , which is suprisingly decent. just a bit average on part throttle , but great on full throttle.
was difficult to tune smoothly but just requires a bit more time to get it right. after a couple of different tunes for different fuel systems its about as good as itll get , which is suprisingly decent. just a bit average on part throttle , but great on full throttle.