Toyspeed

I am now basing the price on 12 cars only ... $100 per person/car for the days fun.

If you would like to come its not to late. I plan to leave late entries open until 26th May.

I will require full payment by this day.

If for some reason we get get larger numbers than 12-13 I will refund the ...

we currently have 11 persons for the track day so i can take up to about 5 more before I want to pull the pin on numbers.

Q

As its Club-K's 10th Birthday this year I have hired out track 3 at the Taupo circuit on Saturday 9th June 2012 to have some fun.

Spots & Costs
There is between 12-16 spots on the day as I want to keep numbers low and managable giving drivers as much time as they want. Final numbers of who has ...

sorted ...

Thanks everyone , especially climber for you help and sugestions.

Q

Dont suppose that anyone knows what pins on the body ecu the fuel senders are meant to connect to. All the diagrams I have show pin B13 (FE) and pin B14 (FR) of the body ecu.

however my wiring loom doesnt have anything going to these pins and the PCD has differnet descriptions on them that I ...

thanks climber .. the main ecu is a lot tidier than what i drew up but basically the same thing. Once I finalise mine i plan to pop em up on my personal site for all to referance to. yours have filled in a few holes in regards to the body ecu but miss a few things like doors (strangly enough :p ...

video uploaded. missed the crank cause i didnt xpect it to fire up. now it starts first pop everytime (touch wood)

m

------------------------------

next issue .. does anyone know where the wire for the oil level sensor runs to i cant locate it anywhere and would love to hook that up at the ...

not a bad idea looks like it would work a treat. are you worried that the lifter wont fill the surge enough?

regardless ... i dunno what I did today but i have 3 words ...
"woop woop woop" , or if you prefer "It f**kin lives"

all i did was to check every wire I could then I changed the fuel ...

NZ_Climber - understand about the damper, that makes more sence than it being a pressure valve as I knew the tank reciculated when it got to presure.

As the Starlet used to be a track car it only had a 25L plastic cell anyways which was why I decided this morning to just buy the altezza tank ...

thanks guys.

The earth under the intake was only finger tight yesterday so i tightened it up but the one on the top of the head was good as gold. will tripple check my earths to ecu, engine, block, battery today and the afm just incase as that is connected by junction blocks and may have a poor ...

Hey all, long time no post but I once again have need. I have finally removed the 4age20v engine that used to sit in the engine bay of my KP61 Starlet and started the install on my new baby, a 3sge BEAMS from a 2001 Altezza, complete with 6 speed box and factory 9000rpm center mounted tach dash ...

might try possums old shop ... ive heard they are good ... the guy who set mine up has it running like 38degrees timing and i cant figure out why, doesnt idle quite right either , specially when cold.

only mods i have at the moment are rwd extractors, open trumpets (thanks to link running map ...

im running an otherwise factory 20v on a v4 link. its been basically setup and runs alright but i know hteres more in it ... jsut want to find it before the new race spec motor is finished sometime soon, then ill have to do it all again.

anyone have a decent tune setting they want to share or ...

chaos ... limited lift and duration .. cant go much bigger than 295 with 10ml ... trd only list to 315 with 10.5ml

trouser fx ... yeah true .. but toyota dont stock them and they cost more than 10 bucks a shim

Q

SORTED ... FYI ....

Being that the 20v shim is underbucket it is actually part of the lashcap or bit that sits ontop of the vavle stem ...

Franklin cams can get these in 140 thou to suit the 20v and they are a direct replacenment for the factory 30thou items. then you just need to get them ...

largest shims ive found so far are 65thou and ive had a big look .. i dont expect that il find any but you never know .. as for building th estem up ... mmmmmmmm .... ild rather put 2x 50thou shims under the bucket

Q

anyone know where i can get some new shims for my 20v silvertop ... my engine man says they need to be 100thou (2.6ml ish), yes its heavily modified

being underbucket i spose i could use 2x 50 thou shims as i cant spit them out .... like shim over ...

OR

does anyone know of valves that ...

this was an easier option as i was flat out today :p

a freind wants to know what model 3sge come out with the shim under buckets.

Q

well im running flat 15s and the odd 14.8 on a completely stock 20v .... only mod i have made is simosa pod and extractors .... mind you my car only weighs 800kg

cold air is good though ... also make sure your cars not running to cool .. if it does the vvt wont switch on and theres a power loss ...