C52 ... C60 ... lsd

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

C52 ... C60 ... lsd

Postby flying_wedge » Fri Jan 27, 2012 7:51 am

Might be an obvious answer to this question, but it pays to check :)

I have a C52 with an lsd, and a C60 open diff. Being the same gearbox code, could I swap the lsd from the C52 to the C60?
What are tolerances on diffs with power? Current C52 dealing with ~160 engine hp, will be facing ~210 hp in C60.

Cheers
User avatar
flying_wedge
Toyspeed Member
 
Posts: 325
Joined: Sun Oct 23, 2005 7:12 pm
Location: Chch

Postby thegreatestben » Fri Jan 27, 2012 9:24 pm

Had a c52 open diff in the 7agte adub. She'll be right ;)
User avatar
thegreatestben
Toyspeed Member
 
Posts: 2083
Joined: Sat Aug 26, 2006 5:09 am
Location: Lower Hutt

Postby CXGPWR » Sat Jan 28, 2012 1:35 am

Had a C56 in my fxgt, had 230whp 4agte, held up mint and was only a shitty torsen lsd but that took a hammering
CXGPWR's 1985 Toyota Trueno Racecar Spec
Build Thread
Discussion
CXGPWR
Toyspeed Member
 
Posts: 194
Joined: Fri Aug 24, 2007 12:57 pm
Location: Palmerston North

Postby crispy'86 » Sat Jan 28, 2012 8:44 am

C60 or 160 6 speed out of ae111 levin/trueno??

I thought (and don't quote me) the lsd unit would work but the crown wheel is narrower on the 6 speeds?? It has been a while since i stripped the gearbox in a customers 6 speed bzr trueno that popped the gearbox.
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
User avatar
crispy'86
** Moderator **
 
Posts: 3548
Joined: Thu Jul 03, 2003 11:27 pm
Location: Chch

Postby GTTpower » Sat Jan 28, 2012 9:13 am

C60 is out of ZZE123 Corolla's, much stronger unit. Can you actually swap the bellhousing to accept an A engine?
1999 SXE10 Altezza RS200Z
2004 Honda SCV100
Previous: 1993 EP85 Starlet, 1984 KP60 Starlet
Steam/Origin ID: nzEP85
User avatar
GTTpower
Toyspeed Member
 
Posts: 1160
Joined: Wed May 02, 2007 8:47 am
Location: Hamilton

Postby flying_wedge » Sat Jan 28, 2012 12:57 pm

Its a c60 6 speed, not c160. For a 2zz.
Have lsd for a c52, and I would be keen to know if this would fit the c60 box. Many years between them I know, but same gearbox code ...
User avatar
flying_wedge
Toyspeed Member
 
Posts: 325
Joined: Sun Oct 23, 2005 7:12 pm
Location: Chch

Postby crispy'86 » Sat Jan 28, 2012 12:58 pm

I've wondered this too as our corolla fielder has the 1zzfe and C52 5 speed so........ would it just be a straight bolt up to the block or do you have to strip the box to fit the A bolt pattern
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
User avatar
crispy'86
** Moderator **
 
Posts: 3548
Joined: Thu Jul 03, 2003 11:27 pm
Location: Chch


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot] and 18 guests